As submitted confidentially to the Securities and Exchange Commission on September 27, 2019. This draft registration statement has not been publicly filed with the Securities and Exchange Commission and all information herein remains strictly confidential.

Registration No. 333-            

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form S-1

REGISTRATION STATEMENT

Under

The Securities Act of 1933

SiTime Corporation

(Exact name of Registrant as specified in its charter)

SiTime Corporation

5451 Patrick Henry Drive

Santa Clara, California 95054

(408) 328-4400

(Address, including zip code, and telephone number, including area code, of Registrant’s principal executive offices)

Rajesh Vashist

Chief Executive Officer

SiTime Corporation

5451 Patrick Henry Drive

Santa Clara, California 95054

(408) 328-4400

(Name, address, including zip code, and telephone number, including area code, of agent for service)

Copies to:

Approximate date of commencement of proposed sale to the public: As soon as practicable after this registration statement becomes effective.

If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act, check the following box:  ☐

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 7(a)(2)(B) of the Securities Act.  ☒

CALCULATION OF REGISTRATION FEE

The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the Registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with the provisions of Section 8(a) of the Securities Act of 1933 or until the Registration Statement shall become effective on such date as the Commission, acting pursuant to said Section 8(a), may determine.

The information in this preliminary prospectus is not complete and may be changed. We may not sell these securities until the registration statement filed with the Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell these securities.

PRELIMINARY PROSPECTUS

(Subject to Completion, dated                      , 2019)

                 Shares

COMMON STOCK

This is the initial public offering of shares of common stock of SiTime Corporation. We are offering      shares of our common stock, and MegaChips Corporation, or MegaChips or the Selling Stockholder, is offering an additional                  shares of our common stock. We will not receive any of the proceeds from the sale of shares by the Selling Stockholder. No public market currently exists for our shares. We anticipate that the initial public offering price will be between $         and $         per share. We are currently a wholly owned subsidiary of MegaChips. Upon completion of this offering, MegaChips will own approximately     % of our outstanding common stock (approximately     % if the underwriters exercise their over-allotment option in full). For additional information regarding our relationship with MegaChips, see “Certain Relationships and Related Party Transactions” and “Principal and Selling Stockholder.” Upon completion of this offering, we will be a “controlled company” within the meaning of the listing rules of The Nasdaq Stock Market LLC.

We intend to apply to have our common stock listed on The Nasdaq Global Select Market under the symbol “SITM.”

We are an “emerging growth company,” as defined under the federal securities laws and are subject to reduced public company reporting requirements. Investing in our common stock involves risks. See “Risk Factors” beginning on page 16.

PRICE $     PER SHARE

We have granted the underwriters the right to purchase up to            additional shares of common stock from us, solely to cover over-allotments, if any.

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

The underwriters expect to deliver the shares of common stock to purchasers on or about                 , 2019.

            , 2019

TABLE OF CONTENTS

Neither we, the Selling Stockholder, nor the underwriters have authorized anyone to provide any information or to make any representations other than those contained in this prospectus or in any free writing prospectuses we have prepared. Neither we, the Selling Stockholder, nor the underwriters take any responsibility for, or can provide any assurance as to the reliability of, any other information that others may give you. We and the Selling Stockholder are not offering to sell, or seeking offers to buy, shares of our common stock in any jurisdiction where these offers and sales are not permitted. The information in this prospectus is accurate only as of the date of this prospectus, regardless of the time of delivery of this prospectus or any sale of shares of our common stock. Our business, financial condition, results of operations, and prospects may have and are likely to have changed since that date.

Through and including             , 2019 (the 25th day after the date of this prospectus), all dealers effecting transactions in these securities, whether or not participating in this offering, may be required to deliver a prospectus. This delivery requirement is in addition to the obligation of dealers to deliver a prospectus when acting as underwriters and with respect to their unsold allotments or subscriptions.

For investors outside the United States: Neither we, the Selling Stockholder, nor the underwriters have done anything that would permit this offering or possession or distribution of this prospectus in any jurisdiction where action for that purpose is required, other than in the United States. Persons outside the United States who come into possession of this prospectus must inform themselves about, and observe any restrictions relating to, the offering of the shares of our common stock and the distribution of this prospectus outside of the United States.

i

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

RISK FACTORS

Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this prospectus, including our audited consolidated financial statements and related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” before investing in our common stock. If any of the following risks are realized, in whole or in part, our business, financial condition, results of operations, and prospects could be materially and adversely affected. In that event, the price of our common stock could decline, and you could lose part or all of your investment. Additional risks and uncertainties not presently known to us or that we currently deem immaterial also may impair our business operation.

Risks Related to Our Business and Our Industry

We currently depend on one end customer for a large portion of our revenue. The loss of, or a significant reduction in orders from our customers, including this end customer, could significantly reduce our revenue and adversely impact our operating results.

We believe that our operating results for the foreseeable future will continue to depend to a significant extent on revenue attributable to Apple Inc., or Apple, our largest end customer. Sales attributable to this end customer have historically accounted for a large portion of our revenue and accounted for approximately 61% and 40% of our revenue in 2017 and 2018, respectively. Revenue attributable to this end customer has decreased in absolute dollars and as a percentage of revenue from 2017 to 2018. We anticipate revenue attributable to this customer will fluctuate from period to period, although we expect to remain dependent on this end customer for a substantial portion of our revenue for the foreseeable future. Although we sell our products to this customer through distributors on a purchase order basis, including Pernas Electronics Co., Ltd., or Pernas, Arrow Electronics, Inc., or Arrow, and Quantek Technology Corporation, or Quantek, we have a development and supply agreement, which provides a general framework for our transactions with Apple. This agreement continues until either party terminates for material breach. Under this agreement, we have agreed to develop and deliver new products to this end customer at its request, provided it also meets our business purposes, and have agreed to indemnify it for intellectual property infringement or any injury or damages caused by our products. This end customer does not have any minimum or binding purchase obligations to us under this agreement and could elect to discontinue making purchases from us with little or no notice. If our end customers were to choose to work with other manufacturers or our relationships with our customers is disrupted for any reason, it could have a significant negative impact on our business. Any reduction in sales attributable to our larger customers, including our largest end customer, would have a significant and disproportionate impact on our business, financial condition, and results of operations.

Because our sales are made pursuant to standard purchase orders, orders may be cancelled, reduced, or rescheduled with little or no notice and without penalty. Cancellations of orders could result in the loss of anticipated sales without allowing us sufficient time to reduce our inventory and operating expenses. In addition, changes in forecasts or the timing of orders from our customers expose us to the risks of inventory shortages or excess inventory. This in turn could cause our operating results to fluctuate. For example, in 2018 we incurred approximately $8.0 million in cost of inventory in anticipation of an order that did not materialize. This resulted in an inventory write-down of approximately $8.0 million for 2018. We were able to sell approximately $3.0 million of such inventory in the fourth quarter of 2018.

Our end customers, or the distributors through which we sell to these customers, may choose to use products in addition to ours, use a different product altogether, or develop an in-house solution. Any of these events could significantly harm our business, financial condition, and results of operations. In addition, if our distributors’ relationships with our end customers, including our larger end customers, are disrupted for inability to deliver sufficient products or for any other reason, it could have a significant negative impact on our business, financial condition, and results of operations.

16

If we are unable to expand or further diversify our customer base, our business, financial condition, and results of operations could suffer.

We sell our products primarily through distributors and resellers, who in turn sell to our end customers. In 2017 and 2018, our top three direct customers by revenue together accounted for approximately 79% and 65% of our revenue, respectively. Based on sell-through information available through our distributors, we believe that revenue attributable to our top ten end customers accounted for 74%, 60%, 60%, and 53% of our revenue in 2017, 2018, and the six months ended June 30, 2018 and 2019, respectively. We expect the composition of our top end customers to vary from period to period, and that revenue attributable to our top ten end customers in any given period may decline over time. Our relationships with existing customers may deter potential customers who compete with these customers from buying our silicon timing systems solutions. If we are unable to expand or further diversify our customer base, it could harm our business, financial condition, and results of operations.

Because we do not have long-term purchase commitments with our customers, orders may be cancelled, reduced, or rescheduled with little or no notice, which in turn exposes us to inventory risk, and may cause our business and results of operations to suffer.

We sell our products primarily through distributors and resellers, with no long-term or minimum purchase commitments from them or their end customers. Substantially all of our sales to date have been made on a purchase order basis, which orders may be cancelled, changed, or rescheduled with little or no notice or penalty. As a result, our revenue and operating results could fluctuate materially and could be materially and disproportionately impacted by purchasing decisions of our customers, including our larger customers. In the future, our distributors or their end customers may decide to purchase fewer units than they have in the past, may alter their purchasing patterns at any time with limited or no notice, or may decide not to continue to purchase our silicon timing systems solutions at all, any of which could cause our revenue to decline materially and materially harm our business, financial condition, and results of operations. Cancellations of, reductions in, or rescheduling of customer orders could also result in the loss of anticipated sales without allowing us sufficient time to reduce our inventory and operating expenses, as a substantial portion of our expenses are fixed at least in the short term. In addition, changes in forecasts or the timing of orders expose us to the risks of inventory shortages or excess inventory. As we no longer intend to acquire inventory to pre-build custom products, we may not be able to fulfill increased demand, at least in the short term. Any of the foregoing events could materially and adversely affect our business, financial condition, and results of operations.

Our revenue and operating results may fluctuate from period to period, which could cause our stock price to fluctuate.

Our revenue and operating results have fluctuated in the past and may fluctuate from period to period in the future due to a variety of factors, many of which are beyond our control. Factors relating to our business that may contribute to these fluctuations include the following factors, as well as other factors described elsewhere in this prospectus:

17

As a result of these and other factors, you should not rely on the results of any prior quarterly or annual periods, or any historical trends reflected in such results, as indications of our future revenue or operating performance. Fluctuations in our revenue and operating results could cause our stock price to decline and, as a result, you may lose some or all of your investment.

We have an accumulated deficit and have incurred net losses in the past, and we may continue to incur net losses in the future.

As of December 31, 2017 and 2018 and June 30, 2019, we had an accumulated deficit of $38.1 million, $47.4 million, and $55.7 million, respectively. We generated net income of $4.7 million in 2017 and incurred a net loss of $9.3 million in 2018 and a net loss of $8.3 million for the six months ended June 30, 2019. The loss in 2018 was primarily attributable to a reduction in revenue from our largest end customer. The loss in the six months ended June 30, 2019 was primarily due to a decrease in revenue from customers in Asia primarily as a result of lower sales volume, as well as a reduction in revenue from our largest end customer. We may continue to incur net losses in the future.

We have a history of net operating losses and our accumulated deficit raises substantial doubt regarding our ability to continue as a going concern. If we do not continue as a going concern, investors could lose their entire investment.

Since our acquisition by MegaChips in 2014, we have financed our operations primarily through debt financing. As of June 30, 2019, we had an accumulated deficit of $55.7 million and loan obligations of $46.0 million which are due in 2019. For more information regarding our loan obligations, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources—Debt Obligations.” Although we expect to use cash proceeds generated from operations in 2019 to help finance our operations and capital needs, we will need additional funding in 2019 to repay our loan obligations and other capital needs.

As a result of the above, management concluded that there is substantial doubt in our ability to continue as a going concern. Management’s plans to address this uncertainty are discussed in Note 1 to our consolidated financial statements. The report of our independent registered public accountant on our financial statements as of and for the years ended December 31, 2017 and 2018 also includes explanatory language describing the existence of substantial doubt about our ability to continue as a going concern. There have been no adjustments to the accompanying financial statements to reflect this uncertainty.

Our ability to continue as a going concern is dependent upon us becoming profitable in the future or to obtain the necessary capital to meet our obligations and repay our liabilities when they become due. Our

18

determination of substantial doubt as going concern could materially limit our ability to raise additional funds through the issuance of equity securities or otherwise. There can be no assurance that we will ever become profitable again or continue as a going concern.

Our success and future revenue depend on our ability to achieve design wins and to convince our current and prospective customers to design our products into their product offerings. If we do not continue to win designs or our products are not designed into our customers’ product offerings, our results of operations and business will be harmed.

We sell our silicon timing systems solutions to customers who select our solutions for inclusion in their product offerings. This selection process is typically lengthy and may require us to incur significant design and development expenditures and dedicate scarce engineering resources in pursuit of a single design win with no assurance that our solutions will be selected. If we fail to convince our current or prospective customers to include our products in their product offerings or to achieve a consistent number of design wins, our business, financial condition, and results of operations will be harmed.

Because of our extended sales cycle, our revenue in future years is highly dependent on design wins we are awarded in prior years. It is typical that a design win will not result in meaningful revenue until one year or more later, if at all. If we do not continue to achieve design wins in the short term, our revenue in the following years will deteriorate.

Further, a significant portion of our revenue in any period may depend on a single product design win with a large customer. As a result, the loss of any key design win or any significant delay in the ramp of volume production of the customer’s products into which our product is designed could adversely affect our business, financial condition, and results of operations. We may not be able to maintain sales to our key customers or continue to secure key design wins for a variety of reasons, and our customers can stop incorporating our products into their product offerings with limited notice to us and suffer little or no penalty.

If we fail to anticipate or respond to technological shifts or market demands, or to timely develop new or enhanced products or technologies in response to the same, it could result in decreased revenue and the loss of our design wins to our competitors. Due to the interdependence of various components in the systems within which our products and the products of our competitors operate, customers are unlikely to change to another design, once adopted, until the next generation of a technology. As a result, if we fail to introduce new or enhanced products that meet the needs of our customers or penetrate new markets in a timely fashion, and our designs do not gain acceptance, we will lose market share and our competitive position.

The loss of a key customer or design win, a reduction in sales to any key customer, a significant delay or negative development in our customers’ product development plans, or our inability to attract new significant customers or secure new key design wins could seriously impact our revenue and materially and adversely affect our business, financial condition, and results of operations.

We may experience difficulties demonstrating the value to customers of newer solutions if they believe existing solutions are adequate to meet end customer expectations. If we are unable to sell new generations of our product, our business would be harmed.

As we develop and introduce new solutions, we face the risk that customers may not value or be willing to bear the cost of incorporating these newer solutions into their product offerings, particularly if they believe their customers are satisfied with prior offerings. Regardless of the improved features or superior performance of the newer solutions, customers may be unwilling to adopt our new solutions due to design or pricing constraints. Because of the extensive time and resources that we invest in developing new solutions, if we are unable to sell new generations of our solutions, our revenue could decline and our business, financial condition, and results of operations would be negatively affected.

19

The success of our products is dependent on our customers’ ability to develop products that achieve market acceptance, and our customers’ failure to do so could negatively affect our business.

The success of our silicon timing systems solutions is heavily dependent on the timely introduction, quality, and market acceptance of our customers’ products incorporating our solutions, which are impacted by factors beyond our control. Our customers’ products are often very complex and subject to design complexities that may result in design flaws, as well as potential defects, errors, and bugs. We have in the past been subject to delays and project cancellations as a result of design flaws in the products developed by our customers, changing market requirements, such as the customer adding a new feature, or because a customer’s product fails their end customer’s evaluation or field trial. In other cases, customer products are delayed due to incompatible deliverables from other vendors. We incur significant design and development costs in connection with designing our products for customers’ products that may not ultimately achieve market acceptance. If our customers discover design flaws, defects, errors, or bugs in their products, or if they experience changing market requirements, failed evaluations or field trials, or incompatible deliverables from other vendors, they may delay, change, or cancel a project, and we may have incurred significant additional development costs and may not be able to recoup our costs, which in turn would adversely affect our business, financial condition, and results of operations.

Our target customer and product markets may not grow or develop as we currently expect, and if we fail to penetrate new markets and scale successfully within those markets, our revenue and financial condition would be harmed.

Our target markets include the enterprise and telecommunications infrastructure, automotive, industrial, IoT and mobile, and aerospace and defense markets. Substantially all of our revenue for the years ended December 31, 2017 and 2018 and for the six months ended June 30, 2018 and 2019 was derived from sales in the IoT and mobile, industrial, and consumer markets. In 2017, we began introducing products for the automotive market. In addition, within the timing market, substantially all of our revenue to date has been attributable to sales of MEMS oscillators. We intend to introduce products into the clock IC market, which we began sampling in the second quarter of 2019, and to focus on clock IC and timing sync solutions in the future. Any deterioration in our target customer or product markets or reduction in capital spending to support these markets could lead to a reduction in demand for our products, which would adversely affect our revenue and results of operations. Further, if our target customer markets, including the 5G communications or IoT and mobile markets, do not grow or develop in ways that we currently expect, demand for our technology may not materialize as expected, which would also negatively impact our business, financial condition, and results of operations.

We may be unable to predict the timing or development of trends in our target markets with any accuracy. If we fail to accurately predict market requirements or market demand for these solutions, our business will suffer. A market shift towards an industry standard that we may not support could significantly decrease the demand for our solutions.

Our future revenue growth, if any, will depend in part on our ability to expand within our existing markets, our ability to continue to penetrate emerging markets, such as the 5G communications market, which we entered in 2019, and our ability to enter into new markets, such as the industrial, medical, and military markets. Each of these markets presents distinct and substantial challenges and risks and, in many cases, requires us to develop new customized solutions to address the particular requirements of that market. Meeting the technical requirements and securing design wins in any of these new markets will require a substantial investment of our time and resources. We cannot assure you that we will secure design wins from these or other new markets, or that we will achieve meaningful revenue from sales in these markets. If any of these markets do not develop as we currently anticipate or if we are unable to penetrate them and scale in them successfully, our revenue could decline.

20

The average selling prices of our individual products have decreased historically over time and may do so in the future, which could harm our revenue and gross margins.

Although on average selling prices of our products have increased over time as we introduce higher end products, the average selling prices of our individual products generally decrease over time. Our revenue is derived from sales to large distributors and, in some cases, we have agreed in advance to price reductions, generally over a period of time ranging from two months to three years, once the specified product begins to ship in volume. However, our customers may change their purchase orders and demand forecasts at any time with limited notice due in part to fluctuating end-market demand, which can sometimes lead to price renegotiations. Although these price renegotiations can sometimes result in the average selling prices fluctuating over the shorter term, we expect average selling prices generally to decline over the longer term as our products and our end customers’ products mature.

We seek to offset the anticipated reductions in our average selling prices by reducing the cost of our products through improvements in manufacturing yields and lower wafer, assembly, and testing costs, developing new products, enhancing lower-cost products on a timely basis, and increasing unit sales. However, if we are unable to offset these anticipated reductions in our average selling prices, our business, financial condition, and results of operations could be negatively affected.

If we are not able to successfully introduce and ship in volume new products in a timely manner, our business and revenue will suffer.

We have developed products that we anticipate will have product life cycles of ten years or more, as well as other products in more volatile high growth or rapidly changing areas, which may have shorter life cycles. Our future success depends, in part, on our ability to develop and introduce new technologies and products that generate new sources of revenue to replace, or build upon, existing revenue streams. If we are unable to repeatedly introduce, in successive years, new products that ship in volume, or if our transition to these new products does not successfully occur prior to any decrease in revenue from our prior products, our revenue will likely decline significantly and rapidly.

Our gross margins may fluctuate due to a variety of factors, which could negatively impact our results of operations and our financial condition.

Our gross margins may fluctuate due to a number of factors, including customer and product mix, market acceptance of our new products, timing and seasonality of the end-market demand, yield, wafer pricing, packaging and testing costs, competitive pricing dynamics, and geographic and market pricing strategies.

To attract new customers or retain existing customers, we have in the past and will in the future offer certain customers favorable prices, which would decrease our average selling prices and likely impact gross margins. Further, we may also offer pricing incentives to our customers on earlier generations of products that inherently have a higher cost structure, which would negatively affect our gross margins. In addition, in the event our customers, including our larger end customers, exert more pressure with respect to pricing and other terms with us, it could put downward pressure on our margins.

Because we do not operate our own manufacturing, assembly, or testing facilities, we may not be able to reduce our costs as rapidly as companies that operate their own facilities, and our costs may even increase, which could further reduce our gross margins. We rely primarily on obtaining yield improvements and volume-based cost reductions to drive cost reductions in the manufacture of existing products, introducing new products that incorporate advanced features and optimize die size, and other price and performance factors that enable us to increase revenue while maintaining gross margins. To the extent that such cost reductions or revenue increases do not occur at a sufficient level and in a timely manner, our business, financial condition, and results of operations could be adversely affected.

21

In addition, we maintain an inventory of our products at various stages of production and in finished good inventory. We hold these inventories in anticipation of customer orders. If those customer orders do not materialize in a timely manner, we may have excess or obsolete inventory which we would have to reserve or write-down, and our gross margins would be adversely affected.

Our revenue in recent periods may not be indicative of future performance and our revenue may fluctuate over time.

Our recent revenue should not be considered indicative of our future performance. For the years ended December 31, 2017 and 2018, our revenue was $101.1 million and $85.2 million, respectively, and for the six months ended June 30, 2018 and 2019, our revenue was $40.7 million and $30.7 million, respectively. You should not rely on our revenue for any previous quarterly or annual period as any indication of our revenue in future periods or for the full year ending December 31, 2019. As we grow our business, our revenue may fluctuate in future periods due to a number of reasons, which may include slowing demand for our products, increasing competition, a decrease in the growth of our overall market or market saturation, and challenges and our failure to capitalize on growth opportunities.

If we are unable to manage our growth effectively, we may not be able to execute our business plan and our operating results could suffer.

In order to succeed in executing our business plan, we will need to manage our growth effectively as we make significant investments in research and development and sales and marketing, and expand our operations and infrastructure both domestically and internationally. In addition, in connection with operating as a public company, we will incur additional significant legal, accounting and other expenses that we did not incur as a private company. If our revenue does not increase to offset these increases in our expenses, we may not achieve or maintain profitability in future periods.

To manage our growth effectively, we must continue to expand our operations, engineering, financial accounting, internal management, and other systems, procedures, and controls. This may require substantial managerial and financial resources, and our efforts may not be successful. Any failure to successfully implement systems enhancements and improvements will likely have a negative impact on our ability to manage our expected growth, as well as our ability to ensure uninterrupted operation of key business systems and compliance with the rules and regulations applicable to public companies. If we are unable to manage our growth effectively, we may not be able to take advantage of market opportunities or develop new silicon timing systems solutions, and we may fail to satisfy customer product or support requirements, maintain the quality of our solutions, execute our business plan or respond to competitive pressures, any of which could negatively affect our business, financial condition, and results of operations.

Our customers require our products and our third-party contractors to undergo a lengthy and expensive qualification process, which does not assure product sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, our business and operating results would suffer.

Prior to purchasing our silicon timing systems solutions, our customers require that both our solutions and our third-party contractors undergo extensive qualification processes, which involve testing of our products in the customers’ systems, as well as testing for reliability. This qualification process may continue for several months. However, qualification of a product by a customer does not assure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision in our third-party contractors’ manufacturing process or our selection of a new supplier may require a new qualification process with our customers, which may result in delays and in our holding excess or obsolete inventory. After our products are qualified, it can take several months or more before the customer commences volume production of components or systems that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing, and management efforts, to qualifying our products

22

with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, sales of those products to the customer may be precluded or delayed, which would cause our business, financial condition, and results of operations to suffer.

We provide a lifetime warranty on our products and may be subject to warranty or product liability claims, which could result in unexpected expenses and loss of market share.

We provide a lifetime warranty on our products and generally agree to indemnify our customers for defects in our products. We may be subject to warranty or product liability claims. These claims may require us to make significant expenditures to defend those claims, replace our solutions, refund payments, or pay damage awards. This risk is exacerbated by the lifetime warranty of our products, which exposes us to warranty claims for the entire product lifecycle.

Our silicon timing systems solutions have only been incorporated into end products for the past 12 years. Accordingly, the operation of our products and technology has not been validated over longer periods. If a customer’s product fails in use, the customer may incur significant monetary damages, including a product recall or associated replacement expenses as well as lost revenue. The customer may claim that a defect in our product caused the product failure and assert a claim against us to recover monetary damages. In certain situations, circumstances might warrant that we consider incurring the costs or expenses related to a recall of one of our products in order to avoid the potential claims that may be raised should a customer reasonably rely upon our product and suffer a failure due to a design or manufacturing process defect. In addition, the cost of defending these claims and satisfying any arbitration award or judgment with respect to these claims would result in unexpected expenses, which could be substantial, and could harm our business, financial condition, and results of operations. Although we carry product liability insurance, this insurance is subject to significant deductibles and may not adequately cover our costs arising from defects in our products or otherwise.

Defects in our products could harm our relationships with our customers and damage our reputation.

Defects in our products may cause our customers to be reluctant to buy our products, which could harm our ability to retain existing customers and attract new customers and adversely impact our reputation. The process of identifying a defective or potentially defective product in systems that have been widely distributed may be lengthy and require significant resources. Further, if we are unable to determine the root cause of a problem or find an appropriate solution, we may delay shipment to customers. As a result, we may incur significant replacement costs and contract damage claims from our customers, and our reputation, business, financial condition, and results of operations may be adversely affected.

If we fail to accurately anticipate and respond to rapid technological change in the industries in which we operate, our ability to attract and retain customers could be impaired and our competitive position could be harmed.

We operate in industries characterized by rapidly changing technologies as well as technological obsolescence. The introduction of new products by our competitors, the delay or cancellation of any of our customers’ product offerings for which our silicon timing systems solutions are designed, the market acceptance of products based on new or alternative technologies, or the emergence of new industry standards could render our existing or future products uncompetitive, obsolete, and otherwise unmarketable. Our failure to anticipate or timely develop new or enhanced products or technologies in response to changing market demand, whether due to technological shifts or otherwise, could result in the loss of customers and decreased revenue and have an adverse effect on our business, financial condition, and results of operations.

23

If our products do not conform to, or are not compatible with, existing or emerging industry standards, demand for our existing solutions may decrease, which in turn would harm our business and operating results.

We design certain of our products to conform to current industry standards. Some industry standards may not be widely adopted or implemented uniformly, and competing standards may emerge that may be preferred by our distributors or our end customers.

Our ability to compete in the future will depend on our ability to identify and ensure compliance with evolving industry standards in our target markets, as well as in the timing IC industry. The emergence of new industry standards could render our products incompatible with products developed by third-party suppliers or make it difficult for our products to meet the requirements of certain original equipment manufacturers, or OEMs. If our customers or our third-party suppliers adopt new or competing industry standards with which our solutions are not compatible, or if industry groups fail to adopt standards with which our solutions are compatible, our products would become less desirable to our current or prospective customers. As a result, our sales would suffer, and we could be required to make significant expenditures to develop new products. Although we believe our products are compliant with applicable industry standards, proprietary enhancements may not in the future result in conformance with existing industry standards under all circumstances. If our products do not conform to, or are not compatible with, existing or emerging standards, it would harm our business, financial condition, and results of operations.

We may be unable to make the substantial investments that are required to remain competitive in our business.

The semiconductor industry requires substantial and continuous investment in research and development in order to bring to market new and enhanced solutions. We expect our research and development expenditures to increase in the future as part of our strategy to increase demand for our solutions in our current markets and to expand into additional markets. We are a smaller company with limited resources, and we may not have sufficient resources to maintain the level of investment in research and development required to remain competitive. In addition, we cannot assure you that the technologies, which are the focus of our research and development expenditures, will become commercially successful or generate any revenue.

If we fail to compete effectively, we may lose or fail to gain market share, which could negatively impact our operating results and our business.

The global semiconductor market in general, and the timing IC market in particular, is highly competitive. We expect competition to increase and intensify as additional semiconductor companies enter our target markets, and as internal silicon design resources of large OEMs grow. Increased competition could result in price pressure, reduced gross margins and loss of market share, any of which could harm our business, financial condition, and results of operations. Our competitors range from large, international companies offering a wide range of semiconductor products to smaller companies specializing in narrow market verticals. In the MEMS-based oscillator market, we primarily compete against Microchip Technology Inc., or MCHP. In the analog mixed-signal IC and clocking market, we primarily compete against Renesas Electronics Corporation (through their acquisition of Integrated Device Technology, Inc.), Silicon Laboratories Inc., Texas Instruments Incorporated, Microsemi Corporation (which is owned by MCHP), and Analog Devices, Inc. In the oscillator market, we primarily compete against quartz crystal suppliers such as Rakon Limited, Daishinku Corp., or Daishinku, Nihon Dempa Kogyo Co., Ltd., TXC Corporation, Seiko Epson Corporation, and Vectron International (which is owned by MCHP). We expect competition in our current markets to increase in the future as existing competitors improve or expand their product offerings and as new competitors enter these markets. In addition, our future growth will depend in part on our ability to successfully enter and compete in new markets, such as the access market. Some of these markets will likely be served by only a few large, multinational OEMs with substantial negotiating and buying power relative to us and, in some instances, with internally developed silicon solutions that can be competitive to our products.

24

Our ability to compete successfully depends, in part, on factors that are outside of our control, including industry and general economic trends. Many of our competitors are substantially larger, have greater financial, technical, marketing, distribution, customer support, government support, and other resources, are more established than we are and have significantly better brand recognition and broader product offerings. This in turn may enable them to better withstand adverse economic or market conditions in the future and significantly reduce their pricing so as to compete against us. Our ability to compete successfully will depend on a number of factors, including:

Our competitors may also establish cooperative relationships among themselves or with third parties or may acquire companies that provide similar products to ours. As a result, new competitors or alliances may emerge that could capture significant market share. Any of these factors, alone or in combination with others, could harm our business, financial condition, and results of operations and result in a loss of market share and an increase in pricing pressure.

We depend on our executive officers and other key employees, and the loss of one or more of these employees or an inability to attract or retain highly skilled employees could adversely affect our business.

Our success depends largely upon the continued services of our executive officers and other key employees, including our engineering and sales and marketing personnel. From time to time, there may be changes in our executive management team or other key personnel, which could disrupt our business. We do not have employment agreements with our executive officers or other key personnel that require them to continue to work for us for any specified period and, therefore, they could terminate their employment with us at any time. The loss of one or more of our executive officers or other key employees could have an adverse effect on our business.

25

In addition, to execute our growth plan, we must attract and retain highly qualified personnel. Competition for these personnel in the San Francisco Bay Area, where our headquarters is located, and in other locations where we maintain offices, is intense, especially for engineers with MEMS technology and advanced clock IC design expertise. We have from time to time experienced, and we expect to continue to experience, difficulty in hiring and retaining employees with appropriate qualifications. Many of the companies with which we compete for experienced personnel have greater resources than we have. If we hire employees from competitors or other companies, their former employers may attempt to assert that these employees or we have breached legal obligations, resulting in a diversion of our time and resources. In addition, job candidates and existing employees often consider the value of the equity awards they receive in connection with their employment. If the perceived value of our equity awards declines, it may adversely affect our ability to recruit and retain highly skilled employees. Further, changes in immigration policies may negatively impact our ability to attract and retain personnel, including personnel with specialized technical expertise. If we fail to attract new personnel or fail to retain or motivate our current personnel, our business and future growth prospects could be adversely affected.

Our company culture has contributed to our success and if we cannot maintain this culture as we grow, our business could be harmed.

We believe that our company culture, which promotes innovation, open communication, and teamwork, has been critical to our success. We face a number of challenges that may affect our ability to sustain our corporate culture, including:

If we are not able to maintain our culture, our business, financial condition, and results of operations could be adversely affected.

We depend on third parties for our wafer fabrication, assembly and testing operations, which exposes us to certain risks that may harm our business.

We operate an outsourced manufacturing business model. As a result, we rely on third parties for all of our manufacturing operations, including wafer fabrication, assembly, and testing. Although we use multiple third-party supplier sources, we depend on these third parties to supply us with material of a requested quantity in a timely manner that meets our standards for yield, cost, and manufacturing quality. Except for our agreement with Robert Bosch LLC, or Bosch, for MEMS wafers, we do not have any long-term supply agreements with any of our other manufacturing suppliers. These third-party manufacturers often serve customers that are larger than us or require a greater portion of their services, which may decrease our relative importance and negotiating leverage with these third parties.

If market demand for wafers or production and assembly materials increases, or if a supplier of our wafers ceases or suspends operations, our supply of wafers and other materials could become limited. We currently have a ten-year supply agreement with Bosch for the fabrication of our MEMS wafers. This agreement expires in 2027 and may be terminated with three years’ advance notice beginning in February 2024. We currently rely on Bosch for our MEMS fabrication, and Taiwan Semiconductor Manufacturing Company, or TSMC, for our analog circuits fabrication, and any disruption in their supply of wafers or any increases in their wafer or materials prices could adversely affect our gross margins and our ability to meet customer demands in a timely manner, or at all,

26

and lead to reduced revenue. Moreover, wafers constitute a large portion of our product cost. If we are unable to negotiate volume discounts or otherwise purchase wafers at favorable prices and in sufficient quantities in a timely manner, our gross margins would be adversely affected.

To ensure continued wafer supply, we may be required to establish alternative wafer supply sources, which could require significant expenditures and limit our negotiating leverage. We currently rely on Bosch and TSMC as our primary foundries and suppliers for our MEMS timing devices and analog circuits, respectively, and only a few foundry vendors have the capability to manufacture our most advanced solutions, in particular with respect to our MEMS solution. If we engage alternative supply sources, we may encounter difficulties and incur additional costs. For example, we also have a license agreement with Bosch under which Bosch granted us a license to use certain patents. Under this agreement, we are required to pay a royalty fee to Bosch if we engage third parties to manufacture, or if we decide to manufacture ourselves, certain generations of our MEMS wafers through March 31, 2024. In addition, shipments could be significantly delayed while these sources are qualified for volume production. If we are unable to maintain our relationship with Bosch or TSMC, our ability to produce high-quality products could suffer, which in turn could harm our business, financial condition, and results of operations.

We currently rely on Advanced Semiconductor Engineering, Inc., or ASE, Carsem (M) Sdn. Bhd., or Carsem, and United Test and Assembly Center Ltd., or UTAC, for assembly and testing, as well as Daishinku and UTAC for ceramic packaging for some of our products. Certain of our manufacturing, packaging, assembly, and testing facilities are located outside of the United States, including Malaysia, Taiwan, and Thailand, where we are subject to increased risk of political and economic instability, difficulties in managing operations, difficulties in enforcing contracts and our intellectual property, severe weather, and employment and labor difficulties. Although we maintain business disruption insurance, this insurance may not be adequate to cover any losses we may experience as a result of such difficulties. Any of these factors could result in manufacturing and supply problems, and delays in our ability to provide our solutions to our customers on a timely basis, or at all. If we experience manufacturing problems at a particular location, we may be required to transfer manufacturing to a new location or supplier. Converting or transferring manufacturing from a primary location or supplier to a backup facility could be expensive and could take several quarters or more. During such a transition, we would be required to meet customer demand from our then-existing inventory, as well as any partially finished goods that could be modified to the required product specifications. In addition, our end customers may require requalification with a new wafer manufacturer. We typically maintain at least a six-month supply of our MEMS wafers for which Bosch is our primary supplier. We do not otherwise maintain sufficient inventory to address a lengthy transition period. As a result, we may not be able to meet customer needs during such a transition, which could damage our customer relationships.

If one or more of these vendors terminates its relationship with us, or if we encounter any problems with our manufacturing supply chain, our ability to ship our solutions to our customers on time and in the quantity required would be adversely affected, which in turn could cause an unanticipated decline in our sales and loss of customers.

If the foundries with which we contract do not achieve satisfactory yields or quality, our reputation and customer relationships could be harmed.

We depend on satisfactory wafer foundry manufacturing capacity, wafer prices, and production yields, as well as timely wafer delivery to meet customer demand and enable us to maintain gross margins. The fabrication of our products is a complex and technically demanding process. Minor deviations in the manufacturing process can cause substantial decreases in yields and, in some cases, cause production to be suspended. Our foundry vendors may experience manufacturing defects and reduced manufacturing yields from time to time. Further, any new foundry vendors we employ may present additional and unexpected manufacturing challenges that could require significant management time and focus. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials by the foundries that we employ could result in lower than anticipated

27

production yields or unacceptable performance of our devices. Many of these problems are difficult to detect at an early stage of the manufacturing process and may be time-consuming and expensive to correct. Poor production yields from the foundries that we employ, or defects, integration issues, or other performance problems in our solutions could significantly harm our customer relationships and financial results, and give rise to financial or other damages to our customers. Any product liability claim brought against us, even if unsuccessful, would likely be time-consuming and costly to defend.

Manufacturing yields for new products initially tend to be lower as we complete product development and commence volume manufacturing, and typically increase as we bring the product to full production. Our business model includes this assumption of improving manufacturing yields and, as a result, material variances between projected and actual manufacturing yields will have a direct effect on our gross margin and profitability. The difficulty of accurately forecasting manufacturing yields and maintaining cost competitiveness through improving manufacturing yields will continue to be magnified by the increasing process complexity of manufacturing semiconductor products.

Raw material price fluctuations can increase the cost of our products, impact our ability to meet customer commitments, and may adversely affect our results of operations.

The cost of raw materials is a key element in the cost of our products. Our inability to offset material price inflation through increased prices to customers, suppliers, productivity actions, or through commodity hedges could adversely affect our results of operations. Many major components, product equipment items, and raw materials, are procured or subcontracted on a single or sole-source basis. Although we maintain a qualification and performance surveillance process and we believe that sources of supply for raw materials and components are generally adequate, it is difficult to predict what effects shortages or price increases may have in the future. Our inability to fill our supply needs would jeopardize our ability to fulfill obligations under our contracts, which could, in turn, result in reduced sales and profits, contract penalties or terminations, and damage to our customer relationships.

Furthermore, increases in the price of silicon wafers, testing costs, and commodities, which may result in increased production costs, mainly assembly and packaging costs, may result in a decrease in our gross margins. Moreover, our suppliers may pass the increase in raw materials and commodity costs onto us which would further reduce the gross margin of our products. In addition, as we are a fabless company, global market trends such as a shortage of capacity to fulfill our fabrication needs also may increase our raw material costs and thus decrease our gross margin.

We rely on our relationships with industry and technology leaders to enhance our product offerings and our inability to continue to develop or maintain such relationships in the future would harm our ability to remain competitive.

We develop many of our silicon timing systems products for applications in systems that are driven by industry and technology leaders in the communications and computing markets. We work with distributors, resellers, OEMs, and system manufacturers to define industry conventions and standards within our target markets. We believe that these relationships enhance our ability to achieve market acceptance and widespread adoption of our products. If we are unable to continue to develop or maintain these relationships, our silicon timing systems solutions could become less desirable to our customers, our sales could suffer and our competitive position could be harmed.

We are subject to the cyclical nature of the semiconductor industry.

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles, and wide fluctuations in product supply and demand. The industry experienced a significant downturn during the most

28

recent global recession and has been experiencing a downturn in 2019. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels, and accelerated erosion of average selling prices. The current downturn in the semiconductor industry has been attributed to a variety of factors, including the ongoing U.S.-China trade dispute, weakness in demand and pricing for semiconductors across applications, and excess inventory. While this downturn has not directly impacted our business to date, any prolonged or significant downturn in the semiconductor industry could adversely affect our business and reduce demand for our products. Any future downturns in the semiconductor industry could also harm our business, financial condition, and results of operations. Furthermore, any significant upturn in the semiconductor industry could result in increased competition for access to third-party foundry and assembly capacity. We are dependent on the availability of this capacity to manufacture and assemble our products and we can provide no assurance that adequate capacity will be available to us in the future.

Our ability to receive timely payments from, or the deterioration of the financial conditions of, our distributors or our end customers could adversely affect our operating results.

Our ability to receive timely payments from, or the deterioration of the financial condition of, our distributors or our end customers could adversely impact our collection of accounts receivable, and, as a result, our revenue. We regularly review the collectability and creditworthiness of our customers to determine an appropriate allowance for doubtful accounts. Based on our review of our customers, substantially all of which are large distributors, resellers, OEMs, and system manufacturers, we had a $0.2 million and a $0.1 million reserve for doubtful accounts as of December 31, 2018 and June 30, 2019, respectively. If our doubtful accounts, however, were to exceed our current or future allowance for doubtful accounts, our business, financial condition, and results of operations would be adversely affected.

In preparing our consolidated financial statements, we make good faith estimates and judgments that may change or turn out to be erroneous, which could adversely affect our operating results for the periods in which we revise our estimates or judgments.

In preparing our consolidated financial statements in conformity with GAAP, we must make estimates and judgments in applying our most critical accounting policies. Those estimates and judgments have a significant impact on the results we report in our consolidated financial statements. The most difficult estimates and subjective judgments that we make relate to revenue recognition, inventories, internally developed software capitalization, stock-based compensation, and income taxes. We base our estimates on historical experience, input from outside experts and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. We also have other key accounting policies that are not as subjective, and therefore, their application would not require us to make estimates or judgments that are as difficult, but which nevertheless could significantly affect our financial reporting. Actual results may differ materially from these estimates. If these estimates, judgments, or their related assumptions change, our operating results for the periods in which we revise our estimates, judgments, or assumptions could be adversely and perhaps materially affected.

Changes to financial accounting standards may affect our results of operations and could cause us to change our business practices.

We prepare our consolidated financial statements in accordance with GAAP. These accounting principles are subject to interpretation by the Financial Accounting Standards Board, the Securities and Exchange Commission, or the SEC, and various bodies formed to interpret and create accounting rules and regulations. Changes in accounting rules can have a significant effect on our reported financial results and may affect our reporting of transactions completed before a change is announced. Changes to those rules or the questioning of current practices may adversely affect our financial results or the way we conduct our business.

29

Our loan agreements contain certain restrictive covenants that may limit our operating flexibility.

Our loan agreements contain certain restrictive covenants that either limit our ability to, or require a mandatory prepayment in the event that we, incur additional indebtedness, merge with other companies or enter into or consummate certain change of control transactions, acquire other companies, make certain investments, transfer or dispose of assets, amend certain material agreements, or enter into certain other transactions. We may not be able to generate sufficient cash flow or sales to pay the principal and interest under our outstanding debt obligations. Furthermore, our future working capital, borrowings, or equity financing could be unavailable to repay or refinance the amounts outstanding under our current debt obligations. In the event of a liquidation, our existing and any future lenders would be repaid all outstanding principal and interest prior to distribution of assets to unsecured creditors, and the holders of our common stock would receive a portion of any liquidation proceeds only if all of our creditors, including our existing and any future lenders, were first repaid in full.

We may not be able to accurately predict our future capital needs, and we may not be able to obtain additional financing to fund our operations.

We may need to raise additional funds in the future. Any required additional financing may not be available on terms acceptable to us, or at all. If we raise additional funds by issuing equity securities or convertible debt, investors may experience significant dilution of their ownership interest, and the newly-issued securities may have rights senior to those of the holders of our common stock. If we raise additional funds by obtaining loans from third parties, the terms of those financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility and would also require us to incur additional interest expense. If additional financing is not available when required or is not available on acceptable terms, we may have to scale back our operations or limit our production activities, and we may not be able to expand our business, develop or enhance our solutions, take advantage of business opportunities, or respond to competitive pressures, which could negatively impact our revenue and the competitiveness of our products.

We may make acquisitions in the future that could disrupt our business, cause dilution to our stockholders, reduce our financial resources, and harm our business.

In the future, we may acquire other businesses, products, or technologies. Our ability to make acquisitions and successfully integrate personnel, technologies, or operations of any acquired business is unproven. If we complete acquisitions, we may not achieve the combined revenue, cost synergies, or other benefits from the acquisition that we anticipate, strengthen our competitive position, or achieve our other goals in a timely manner, or at all, and these acquisitions may be viewed negatively by our customers, financial markets, or investors. In addition, any acquisitions we make may create difficulties in integrating personnel, technologies, and operations from the acquired businesses and in retaining and motivating key personnel. Acquisitions may disrupt our ongoing operations, divert management from their primary responsibilities, subject us to additional liabilities, increase our expenses, and adversely impact our business, financial condition, and results of operations. Acquisitions may also reduce our cash available for operations and other uses, and could result in an increase in amortization expense related to identifiable assets acquired, potentially dilutive issuances of equity securities, or the incurrence of debt, any of which could harm our business, financial condition, and results of operations.

A portion of our operations is located outside of the United States, which subjects us to additional risks, including increased complexity and costs of managing international operations and geopolitical instability.

We outsource the fabrication and assembly of all of our products to third parties that are primarily located in Germany and Asia. In addition, we conduct research and development activities in the United States, the Netherlands, Taiwan, and Ukraine and work with third-party contractors in Japan and Russia. We also conduct marketing and administrative functions in the United States, China, Taiwan, and Ukraine. In addition, members of our sales force are located in the United States, China, India, Italy, Taiwan, the United Kingdom, and Ukraine. In addition, approximately 96% and 93% of our revenue for the years ended December 31, 2017 and 2018, respectively, was from distributors with ship-to locations outside the United States, although we believe the majority of our end customers are based in the U.S., based on sell-through information provided by these distributors. As a result of our international focus, we face numerous challenges and risks, including:

30

These risks could harm our international operations, delay new product releases, increase our operating costs, and hinder our ability to grow our operations and business and, consequently, our business, financial condition, and results of operations could suffer. For example, we rely on TSMC in Taiwan for the fabrication of our analog circuits and have sales force personnel in Taiwan. If political tensions between China and Taiwan were to increase, it could disrupt our business. In addition, if the political and military situation in Russia and Ukraine, or the relationship between Russia and the United States, significantly worsens, or if either Russia or the United States imposes significant new economic sanctions or restrictions on doing business, and we are restricted or precluded from continuing our operations in Russia or Ukraine, our costs could increase, and our product development efforts, business, financial condition, and results of operations could be significantly harmed.

If significant tariffs or other restrictions are placed on Chinese imports or any related counter-measures are taken by China, our revenue and results of operations may be materially harmed.

If significant tariffs or other restrictions are placed on Chinese imports or any related counter-measures are taken by China, our revenue and results of operations may be materially and adversely affected. Between July and May 2019, the U.S. Trade Representative imposed tariffs between 10% and 25% on a variety of goods imported from China. If the existing tariffs are expanded or interpreted by a court or governmental agency to apply to any of our products, we may be required to raise our prices on those products, which may further result

31

in a loss of customers and harm our operating performance. The current U.S. administration has indicated that it may further alter trade agreements and terms between China and the United States, including limiting trade with China, and may impose additional tariffs on imports from China. For example, on September 1, 2019, the United States imposed a 15% tariff on approximately $110 billion of Chinese imports. If our products become subject to tariffs or other retaliatory trade measures, it could materially and adversely affect our business and operating results. In the event that these or future tariffs are imposed on imports of our products, or that China or other countries take retaliatory trade measures in response to existing or future tariffs, our business may be impacted and we may be required to raise prices or make changes to our operations, any of which could materially harm our revenue or operating results.

Fluctuations in exchange rates between and among the currencies of the countries in which we do business could adversely affect our results of operations.

Our sales have been historically denominated in U.S. dollars. An increase in the value of the U.S. dollar relative to the currencies of the countries in which our customers operate could impair the ability of our customers to cost-effectively purchase or integrate our solutions into their product offerings, which may materially affect the demand for our solutions and cause these customers to reduce their orders, which in turn would adversely affect our revenue and business. If we increase operations in other currencies in the future, we may experience foreign exchange gains or losses due to the volatility of other currencies compared to the U.S. dollar. Certain of our employees are located in Malaysia, the Netherlands, Taiwan, and Ukraine, and we have engineering consultants in Japan and Russia. Accordingly, a portion of our payroll as well as certain other operating expenses are paid in currencies other than the U.S. dollar. Our results of operations are denominated in U.S. dollars, and the difference in exchange rates in one period compared to another may directly impact period-to-period comparisons of our results of operations. Furthermore, currency exchange rates have been especially volatile in the recent past, and these currency fluctuations may make it difficult for us to predict our results of operations.

Failure to comply with the laws associated with our activities outside of the United States could subject us to penalties and other adverse consequences.

We face significant risks if we fail to comply with anti-corruption laws and anti-bribery laws, including, without limitation, the U.S. Foreign Corrupt Practices Act of 1977, as amended, or the FCPA, the U.S. Travel Act, and the UK Bribery Act 2010, that prohibit improper payments or offers of payment to foreign governments and political parties by us for the purpose of obtaining or retaining business. In many foreign countries, particularly in countries with developing economies, it may be a local custom that businesses operating in such countries engage in business practices that are prohibited by the FCPA or other applicable laws and regulations. We are in the early stages of implementing our FCPA compliance program and cannot assure you that all of our employees and agents, as well as those companies to which we outsource certain of our business operations, will not take actions in violation of our policies and applicable law, for which we may be ultimately held responsible. Any violation of these laws could result in severe criminal or civil sanctions and, in the case of the FCPA, suspension or debarment from U.S. government contracting, which could have an adverse effect on our reputation, business, financial condition, and results of operations.

We are subject to government regulation, including import, export and economic sanctions laws and regulations that may expose us to liability and increase our costs.

Our products and technology are subject to U.S. export controls, including the U.S. Department of Commerce’s Export Administration Regulations and economic and trade sanctions regulations administered by the U.S. Treasury Department’s Office of Foreign Assets Controls. These regulations may limit the export of our products and technology, and provision of our services outside of the United States, or may require export authorizations, including by license, a license exception or other appropriate government authorizations,

32

including annual or semi-annual reporting and the filing of an encryption registration. Export control and economic sanctions laws may also include prohibitions on the sale or supply of certain of our products to embargoed or sanctioned countries, regions, governments, persons, and entities. For example, in May 2019, the U.S. Department of Commerce added Huawei Technologies Co., Ltd. and its affiliates to the entity list, banning all exports to Huawei and its affiliates of items subject to control under the Export Administration Regulations, or EAR. Certain exports to Huawei have been permitted under a temporary general license issued by the U.S. Commerce Department, which on August 19, 2019 was extended through November 18, 2019. Although we have not had any direct sales with Huawei, we believe, based on sell-through information provided by our distributors, that we have had a small amount of revenue attributable to Huawei. However, to the extent this occurred during or after May 2019, we understand the products were not subject to the EAR. In addition, various countries regulate the importation of certain products, through import permitting and licensing requirements, and have enacted laws that could limit our ability to distribute our products. The exportation, re-exportation, and importation of our products and technology and the provision of services, including by our partners, must comply with these laws or else we may be adversely affected, through reputational harm, government investigations, penalties, and a denial or curtailment of our ability to export our products and technology. Complying with export control and sanctions laws may be time-consuming and may result in the delay or loss of sales opportunities. Although we take precautions to prevent our products and technology from being provided in violation of such laws, our products and technology may have previously been, and could in the future be, provided inadvertently in violation of such laws, despite the precautions we take. If we are found to be in violation of U.S. sanctions or export control laws, it could result in substantial fines and penalties for us and for the individuals working for us. Changes in export or import laws or corresponding sanctions, may adversely impact our operations, delay the introduction and sale of our products in international markets, or, in some cases, prevent the export or import of our products and technology to certain countries, regions, governments, persons, or entities altogether, which could adversely affect our business, financial condition, and results of operations.

Changes in environmental laws or regulations, including conflict minerals rules, could impair our ability to compete in international markets.

Our product or manufacturing standards could be impacted by new or revised environmental rules and regulations or other social initiatives. For example, the SEC adopted disclosure requirements in 2012 relating to the sourcing of certain minerals from the Democratic Republic of Congo and certain other adjoining countries. These rules, which required reporting starting in 2014, could adversely affect our costs, the availability of minerals used in our products, and our relationships with customers and suppliers. Also, since our supply chain is complex, we may face reputational challenges with our customers, stockholders, and other stakeholders if we are unable to sufficiently verify the origins for any conflict minerals used in the products that we sell.

New or future changes to U.S. and non-U.S. tax laws could materially adversely affect us.

New or future changes in tax laws, regulations, and treaties, or the interpretation thereof, in addition to tax regulations enacted but not in effect, tax policy initiatives and reforms under consideration in the United States or related to the Organisation for Economic Co-operation and Development’s, or OECD, Base Erosion and Profit Shifting, or BEPS, Project, the European Commission’s state aid investigations, and other initiatives could have an adverse effect on the taxation of international businesses. Furthermore, countries where we are subject to taxes, including the United States, are independently evaluating their tax policy and we may see significant changes in legislation and regulations concerning taxation. Certain countries have already enacted legislation, including those related to BEPS Project, which could affect international businesses, and other countries have become more aggressive in their approach to audits and enforcement of their applicable tax laws. On December 22, 2017, the U.S. federal government enacted the Tax Cuts and Jobs Act, or the Tax Act, which made substantial changes to U.S. tax laws, the consequences of which have not yet been fully determined and may be adverse to our business. In addition, we are unable to predict what future tax reform may be proposed or enacted or what effect such changes would have on our business, but any changes, to the extent they are brought into tax legislation, regulations, policies, or practices, could increase our effective tax rates in the countries where we

33

have operations and have an adverse effect on our overall tax rate, along with increasing the complexity, burden and cost of tax compliance, all of which could impact our business, financial condition, and results of operations.

Tax regulatory authorities may disagree with our positions and conclusions regarding certain tax positions resulting in unanticipated costs or non-realization of expected benefits.

A tax authority may disagree with tax positions that we have taken. For example, the Internal Revenue Service, or IRS, or another tax authority could challenge our allocation of income by tax jurisdiction and the amounts paid between our affiliated companies pursuant to our intercompany arrangements and transfer pricing policies, including amounts paid with respect to our intellectual property in connection with our intercompany research and development cost sharing arrangement and legal structure. A tax authority may take the position that material income tax liabilities, interest, and penalties are payable by us, in which case, we expect that we might contest such assessment. Contesting such an assessment may be lengthy and costly and if we were unsuccessful in disputing the assessment, the implications could be materially adverse to us and affect our anticipated effective tax rate or operating income, and we could be required to pay substantial penalties and interest where applicable.

Catastrophic events may disrupt our business.

Our corporate headquarters and some of our suppliers and foundry vendors are located in areas that are in active earthquake zones or are subject to power outages, natural disasters, political, social, or economic unrest, and other potentially catastrophic events. In the event of a major earthquake, hurricane, flooding, or other catastrophic event such as fire, power loss, telecommunications failure, cyber-attack, war, terrorist attack, political, social, or economic unrest, or disease outbreak, we may be unable to continue our operations and may endure system interruptions, reputational harm, delays in our product development, breaches of data security, or loss of critical data, any of which could have an adverse effect on our future results of operations.

State, federal, and foreign laws and regulations related to privacy, data use, and security could adversely affect us.

We are subject to state and federal laws and regulations related to privacy, data use, and security. In addition, in recent years, there has been a heightened legislative and regulatory focus on data security, including requiring consumer notification in the event of a data breach. Legislation has been introduced in Congress and there have been several Congressional hearings addressing these issues. From time to time, Congress has considered, and may do so again, legislation establishing requirements for data security and response to data breaches that, if implemented, could affect us by increasing our costs of doing business. In addition, several states have enacted privacy or security breach legislation requiring varying levels of consumer notification in the event of a security breach. For example, in 2018, California passed the California Consumer Privacy Act, or CCPA, which will go into effect in January 2020, to enhance consumer protection and privacy rights by granting consumers resident in California new rights with respect to the collection of their personal data and imposing new operational requirements on businesses. The CCPA includes a statutory damages framework and private rights of action against businesses that fail to comply with certain CCPA terms or implement reasonable security procedures and practices to prevent data breaches. Several other states are considering similar legislation.

Foreign governments are raising similar privacy and data security concerns. In particular, the European Union has enacted a General Data Protection Regulation, or GDPR, which became effective in May 2018. It is unclear how compliance with GDPR will affect our business. China, Russia, Japan, and other countries in Latin America and Asia are also strengthening their privacy laws and the enforcement of privacy and data security requirements. Complying with such laws and regulations may be time-consuming and require additional resources, and could therefore adversely affect our business, financial condition, and results of operations.

34

Breaches or other disruptions of our security systems may damage our reputation and adversely affect our business.

Our security systems are designed to protect our customers’, suppliers’, and employees’ confidential information, as well as maintain the physical security of our facilities. We also rely on a number of third-party cloud-based service providers of corporate infrastructure services relating to, among other things, human resources, electronic communication services, and some finance functions, and we are, of necessity, dependent on the security systems of these providers. These technologies are subject to failure, including as a result of an inability to have such technologies properly supported, updated, expanded, or integrated into other technologies. These technologies may also contain open source and third-party software which may unbeknownst to us contain defects or viruses.

Any security breaches or other unauthorized access by third parties to the systems of our cloud-based service providers or the existence of computer viruses in their data or software could expose us to a risk of information loss and misappropriation of confidential information. Accidental or willful security breaches or other unauthorized access by third parties to our information systems or facilities, or the existence of computer viruses in our data or software could expose us to a risk of information loss, misappropriation of proprietary and confidential information, as well as work stoppages or disruptions. Any theft or misuse of this information could result in, among other things, unfavorable publicity, damage to our reputation, difficulty in marketing our products, allegations by our customers that we have not performed our contractual obligations, regulatory fines or penalties, litigation by affected parties and possible financial obligations for liabilities and damages related to the theft or misuse of this information, any of which could have an adverse effect on our business, financial condition, results of operations, reputation, and relationships with our customers and suppliers. Cybersecurity threats, which include computer viruses, spyware and malware, attempts to access information, denial of service attacks, and other electronic security breaches, are persistent and evolve quickly. Such threats have increased in frequency, scope, and potential impact in recent years. Since the techniques used to obtain unauthorized access or to sabotage systems change frequently and are often not recognized until after they are launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures.

Risks Related to Intellectual Property

Our failure to adequately protect our intellectual property rights could impair our ability to compete effectively or defend ourselves from litigation, which could harm our business, financial condition, and results of operations.

Our success depends, in part, on our ability to protect our intellectual property. We rely primarily on patent, copyright, trademark, and trade secret laws, as well as confidentiality and non-disclosure agreements, and other contractual protections, to protect our technologies and proprietary know-how, all of which offer only limited protection. The steps we have taken to protect our intellectual property rights may not be adequate to prevent the misappropriation, infringement, or other violation of our proprietary information or infringement of our intellectual property rights, and our ability to prevent such misappropriation, infringement, or other violation is uncertain, particularly in countries outside of the United States. As of September 11, 2019, we had 55 issued U.S. patents, expiring generally between 2026 and 2036, and 29 pending U.S. patent applications (including four provisional applications). Our issued patents and pending patent applications generally relate to our MEMS fabrication process, MEMS resonators, circuits, packaging, and oscillator systems. We cannot assure you that any patents from any pending patent applications (or from any future patent applications) will be issued, and even if the pending patent applications are granted, the scope of the rights granted to us may not be meaningful or provide us with any commercial advantage. For example, these patents could be opposed, contested, circumvented, designed around by our competitors, be narrowed or declared invalid or unenforceable in judicial or administrative proceedings including re-examination, inter partes review, post-grant review, interference and derivation proceedings and equivalent proceedings in foreign jurisdictions, or be subject to ownership claims by third parties. The failure of our patents to adequately protect our technology might make it easier for our

35

competitors to offer similar products or technologies. Our foreign patent protection is less comprehensive than our U.S. patent protection and may not protect our intellectual property rights in some countries where our products are sold or may be sold in the future. Many U.S.-based companies have encountered substantial third-party intellectual property infringement in foreign countries, including countries where we sell products. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. If such an impermissible use of our intellectual property or trade secrets were to occur, our ability to sell our solutions at competitive prices may be adversely affected and our business, financial condition, and results of operations could be adversely affected.

The legal standards relating to the validity, enforceability, and scope of protection of intellectual property rights are uncertain and evolving. We cannot assure you that others will not develop or patent similar or superior technologies or solutions, or that our patents, trademarks, and other intellectual property will not be challenged, invalidated, or circumvented by others.

We also have a license to certain patents from Bosch relating to the design and manufacture of MEMS-based timing applications. The patent rights obtained under the license agreement expire between 2021 and 2029, and the license agreement expires upon expiration of the last patent licensed under the agreement. If we were to lose the benefit of these patents or other licensed technology used in our business, it could harm our business and our ability to compete.

We believe that the success of our business depends more on proprietary technology, information and processes, and know-how than on our patents or trademarks. Much of our proprietary information and technology related to manufacturing processes is not patented and may not be patentable.

Unauthorized copying or other misappropriation of our proprietary technologies could enable third parties to benefit from our technologies without paying us for doing so, which could harm our business. Monitoring unauthorized use of our intellectual property is difficult and costly. It is possible that unauthorized use of our intellectual property may have occurred or may occur without our knowledge. We cannot assure you that the steps we have taken will prevent unauthorized use of our intellectual property, or that others will not develop technologies similar or superior to our technology or design around our intellectual property. Our failure to effectively protect our intellectual property could reduce the value of our technology in licensing arrangements or in cross-licensing negotiations.

In addition, we also rely on contractual protections with our customers, suppliers, distributors, employees, and consultants, and we implement security measures designed to protect our trade secrets and know-how. However, we cannot assure you that we have entered into such agreements with every such party, that these contractual protections and security measures will not be breached, that we will have adequate remedies for any such breach, or that our customers, suppliers, distributors, employees, or consultants will not assert rights to intellectual property or damages arising out of such contracts.

We may in the future need to initiate infringement claims or litigation in order to try to protect or enforce our intellectual property rights. Litigation, whether we are a plaintiff or a defendant, can be expensive and time-consuming and may divert the efforts of our management and other personnel, which could harm our business, whether or not such litigation results in a determination favorable to us. Litigation also puts our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing. Additionally, any enforcement of our patents or other intellectual property may provoke third parties to assert counterclaims against us. If we are unable to meaningfully protect our proprietary rights or if third parties independently develop or gain access to our or similar technologies, our business, financial condition, results of operations, reputation, and competitive position could be harmed.

36

We may face intellectual property infringement, misappropriation, or other claims, which could be time-consuming and costly to defend or settle and which could result in the loss of significant rights and harm our relationships with our customers and distributors.

The semiconductor industry in which we operate is characterized by companies that hold patents and other intellectual property rights and vigorously pursue, protect, and enforce intellectual property rights. From time to time, third parties may assert against us and our customers and distributors their patent and other intellectual property rights to technologies that are important to our business. For example, in March 2019, VTT Technical Research Centre of Finland, Ltd. filed suit in the United States District Court for the Northern District of California alleging infringement by us of a patent. We have not accrued for a loss contingency relating to this matter. For more information regarding this matter, see “Business—Legal Proceedings.”

In addition, our commercial success depends upon our ability to manufacture and sell our products without infringing, misappropriating, or otherwise violating the intellectual property rights of others. Claims that our products, processes, or technology infringe, misappropriate, or otherwise violate third-party intellectual property rights, regardless of their merit or resolution, could be costly to defend or settle and could divert the efforts and attention of our management and other personnel. We may in the future, particularly as a public company with an increased profile and visibility, receive communications from others alleging our infringement, misappropriation, or other violation of patents, trade secrets, or other intellectual property rights. We cannot assure you that, if made, these claims will not be successful, and lawsuits resulting from such allegations, even if we believe they are invalid, could subject us to significant liability for damages, invalidate our proprietary rights, and prevent us from selling specific products. Moreover, there could be public announcements of the results of hearings, motions, or other interim proceedings or developments and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common stock.

Intellectual property claims could also harm our relationships with our customers or distributors and might deter future customers from doing business with us. We do not know whether we will prevail in any such proceedings given the complex technical issues and inherent uncertainties in intellectual property litigation. If any future proceedings result in an adverse outcome, we could be required to:

Any of the foregoing results could adversely affect our business, financial condition, and results of operations.

37

Any potential dispute involving patents or other intellectual property could affect our customers, which could trigger our indemnification obligations to them and result in substantial expense to us.

In any potential dispute involving patents or other intellectual property, our customers could also become the target of litigation. Our agreements with customers and other third parties generally include indemnification or other provisions under which we agree to indemnify or otherwise be liable to them for losses suffered or incurred as a result of claims of intellectual property infringement, damages caused by us to property or persons, or other liabilities relating to or arising from our solutions included in their products. Large indemnity payments or damage claims from contractual breach could harm our business, financial condition, and results of operations. From time to time, customers require us to indemnify or otherwise be liable to them for breach of confidentiality or failure to implement adequate security measures with respect to their intellectual property and trade secrets. Although we normally contractually limit our liability with respect to such obligations, we may still incur substantial liability related to them. Any litigation against our customers could trigger technical support and indemnification obligations under some of our agreements, which could result in substantial expense to us.

In addition, other customers or end customers with whom we do not have formal agreements requiring us to indemnify them may ask us to indemnify them if a claim is made as a condition to awarding future design wins to us. Because some of our customers are larger than we are and have greater resources than we do, they may be more likely to be the target of an infringement claim by third parties than we would be, which could increase our chances of becoming involved in a future lawsuit. If any such claims were to succeed, we might be forced to pay damages on behalf of our customers that could increase our expenses, disrupt our ability to sell our solutions and reduce our revenue. Any dispute with a customer with respect to such obligations could have adverse effects on our relationship with that customer and other current and prospective customers and reduce demand for our solutions. In addition to the time and expense required for us to supply support or indemnification to our customers, any such litigation could severely disrupt or shut down the business of our customers, which in turn could hurt our relations with our customers and cause the sale of our products to decrease. Any of the foregoing could harm our business, financial condition, and results of operations.

Risks Related to Our Relationship with MegaChips Corporation

As long as MegaChips controls us, your ability to influence matters requiring stockholder approval will be limited.

After this offering, MegaChips will own              shares of our common stock, representing approximately     % of our total outstanding shares of common stock, assuming the underwriters do not exercise their over-allotment option, and approximately     % if the underwriters exercise their over-allotment option in full. Upon completion of this offering, for so long as MegaChips continues to hold at least 50% of our outstanding common stock, is expected to continue to hold at least two out of seven seats on our board of directors. For so long as MegaChips, its successors in interest, and its subsidiaries hold at least a majority of our outstanding common stock, MegaChips will be able to elect the members of our board of directors and could at any time replace our entire board of directors.

In addition, until such time as MegaChips, its successors in interest, and its subsidiaries collectively own less than a majority of the shares of all of our common stock then outstanding, MegaChips will have the ability to take stockholder action without the vote of any other stockholder, and investors in this offering will not be able to affect the outcome of any stockholder vote during this period. As a result, MegaChips will have the ability to control all matters affecting us, including:

38

MegaChips’ voting control may discourage transactions involving a change of control of us, including transactions in which you as a holder of our common stock might otherwise receive a premium for your shares over the then current market price.

MegaChips is not prohibited from selling a controlling interest in us to a third party and may do so without your approval and without providing for a purchase of your shares of common stock. Accordingly, your shares of common stock may be worth less than they would be if MegaChips did not maintain voting control over us.

We may be impacted by risks associated with MegaChips and third parties may seek to hold us responsible for liabilities of MegaChips.

We may be negatively impacted by events affecting MegaChips. For example, if MegaChips were subject to shareholder or other litigation or takeover activity, it could disrupt our business and operations. In addition, third parties may seek to hold us responsible for MegaChips’ liabilities, particularly as a public company in the U.S. with an increased profile and visibility. However, if those liabilities are significant and we are ultimately held liable for them, we cannot assure you that we will be able to recover the full amount of our losses from MegaChips. This in turn may adversely affect our business, financial condition, and results of operations. Further, we may also be subject to risks associated with changes in Japanese laws and regulations, which may impact us as a subsidiary of a Japanese company.

Our inability to resolve any disputes that arise between us and MegaChips with respect to our past and ongoing relationships may adversely affect our operating results.

Disputes may arise between MegaChips and us in a number of areas relating to our past and ongoing relationships, including:

We may not be able to resolve any potential conflicts, and even if we do, the resolution may be less favorable than if we were dealing with an unaffiliated party.

We currently have a loan agreement with MegaChips. As of June 30, 2019, the outstanding balance under this loan, or the Parent Loan, was $3.0 million. The Parent Loan bears interest at a rate equal to the interest rate at which MegaChips procured the funds from Sumitomo Mitsui Banking Corporation, or SMBC, plus 0.09%. MegaChips has discretion whether to accept our request for a loan. We have also entered into a distribution agreement with MegaChips under which MegaChips has the exclusive right to promote, market, and sell our products in Japan as the exclusive distributor. The agreements we entered into with MegaChips may be amended

39

upon agreement between the parties. Because we are controlled by MegaChips, we may not have the leverage to negotiate amendments to these agreements on terms as favorable to us compared to those we would negotiate with an unaffiliated third party.

In addition, MegaChips guarantees our obligations under our revolving line of credit with The Bank of Tokyo-Mitsubishi UFJ, Ltd., or MUFG, which has an aggregate principal amount of up to $50.0 million, and our revolving line of credit with SMBC which has an aggregate principal amount of up to $20.0 million. We may not have the leverage to negotiate terms favorable to us under these agreements upon completion of the offering, as we will no longer be a wholly owned subsidiary of MegaChips. See “Certain Relationships and Related Party Transactions—Agreements with MegaChips.”

There could be potential conflicts of interest between us and affiliates of MegaChips, which could impact our business and operating results.

Some of our directors and executive officers own MegaChips’ common stock and restricted stock units. For information regarding the ownership of MegaChips’ common stock and options to purchase MegaChips’ common stock, see “Executive Compensation—Equity-Based Incentive Awards—MegaChips Equity Awards” and “Executive Compensation—Agreements with Our Named Executive Officers and Potential Payments upon Termination or Change of Control.” In addition, some of our directors are executive officers and/or directors of MegaChips. Ownership of MegaChips securities by our directors and officers after this offering and the presence of executive officers or directors of MegaChips on our board of directors could create, or appear to create, conflicts of interest with respect to matters involving both us and MegaChips. For example, corporate opportunities may arise that concern both of our businesses, such as the potential acquisition of a particular business or technology that is complementary to both of our businesses. In addition, we have not established at this time any procedural mechanisms to address actual or perceived conflicts of interest of such directors and officers and expect that our board of directors, in the exercise of its fiduciary duties, will determine how to address any actual or perceived conflicts of interest on a case-by-case basis. If any corporate opportunity arises and if our directors and officers do not pursue it on our behalf pursuant to the provisions in our amended and restated certificate of incorporation, we may not become aware of, and may potentially lose, a significant business opportunity.

In addition, MegaChips is listed on the Tokyo Stock Exchange and is therefore subject to disclosure and reporting obligations in Japan that may vary from the disclosure and reporting obligations to which we are subject, as well as the timing of such disclosure and reporting obligations. For example, MegaChips may be required to include financial information regarding us in its consolidated financial statements prior to the time we may otherwise be required to file a periodic report relating to our financial information for a given fiscal period. This in turn may cause confusion for investors in our common stock.

MegaChips may at any time replace our entire board of directors. As a result, unless and until MegaChips, its successors in interest, and its subsidiaries collectively own less than a majority of our common stock then outstanding, MegaChips could effectively control and direct our board of directors, which in turn may create issues if and to the extent our interests and those of MegaChips diverge. Under these circumstances, persons who might otherwise accept our invitation to join our board of directors may decline.

Upon completion of this offering, we will be a “controlled company” within the meaning of the Nasdaq listing rules and as such are exempt from certain corporate governance requirements.

As a result of MegaChips’ holding more than 50% of the voting power for our board of directors described above, we are a “controlled company” within the meaning of the listing rules of The Nasdaq Stock Market LLC, or the Nasdaq listing rules. Therefore, we are not required to comply with certain corporate governance rules that would otherwise apply to us as a listed company on The Nasdaq Stock Market LLC, or Nasdaq, including the requirement that compensation committee and nominating and corporate governance committee be composed

40

entirely of “independent” directors (as defined by the Nasdaq listing rules). As a “controlled company” our board of directors is not required to include a majority of “independent” directors. Should the interests of MegaChips differ from those of other stockholders, it is possible that the other stockholders might not be afforded such protections as might exist if our board of directors, or such committees, were required to have a majority, or be composed exclusively, of directors who were independent of MegaChips or our management.

Risks Related to Our Common Stock and this Offering

An active trading market for our common stock may not develop or be sustained and you may not be able to sell your shares at or above the initial public offering price, or at all.

There has been no public market for our common stock prior to this offering. The initial public offering price for our common stock will be determined through negotiations between the underwriters and us and may vary from the market price of our common stock following this offering. If you purchase our common stock in this offering, you may not be able to resell those shares at or above the initial public offering price, or at all. An active market in our common stock may not develop upon completion of this offering or, if it does develop, it may not be sustainable or liquid enough for you to sell your shares. We have applied to list our common stock on The Nasdaq Global Select Market but we cannot assure you that an active trading market will develop.

Our stock price may be volatile and may decline, resulting in a loss of some or all of your investment.

The trading price and volume of our common stock is likely to be volatile and could fluctuate significantly in response to numerous factors, many of which are beyond our control, including:

41

In addition, the market for technology stocks and the stock markets in general have experienced extreme price and volume fluctuations. Stock prices of many technology companies have fluctuated in a manner unrelated or disproportionate to the operating performance of those companies. In the past, stockholders have instituted securities class action litigation following periods of market volatility. If we were to become involved in securities litigation, it could subject us to substantial costs, divert resources and the attention of management from our business and adversely affect our business, financial condition, and results of operations.

Substantial future sales of our common stock could cause the market price of our common stock to decline.

The market price of our common stock could decline as a result of substantial sales of our common stock, particularly sales by our directors, executive officers, and significant stockholders, including MegaChips, currently our sole stockholder, a large number of shares of our common stock becoming available for sale or the perception in the market that holders of a large number of shares intend to sell their shares. Upon completion of this offering, we will have approximately              shares of common stock outstanding, assuming no exercise of the underwriters’ over-allotment option. All of the shares of common stock sold in this offering will be freely transferable without restriction or additional registration under the Securities Act of 1933, as amended, or the Securities Act. Subject to the restrictions under Rule 144 under the Securities Act,              shares of common stock outstanding after this offering will be eligible for resale 180 days after the date of this prospectus upon the expiration of lock-up agreements or other contractual restrictions. In addition, Barclays Capital Inc., on behalf of the underwriters, may in its sole discretion release some or all of the shares subject to the lock-up agreements prior to the expiration of this 180-day lock-up period, subject to applicable notice requirements and in some cases without public notice. See “Shares Eligible for Future Sale” for additional information. As these resale restrictions end, the market price of our common stock could decline if the holders of those shares, including MegaChips, sell them or are perceived by the market as intending to sell them. After these contractual resale restrictions lapse, MegaChips will be able to sell some or all of its shares of our common stock, subject only to the applicable restrictions under of federal and state securities laws.

After this offering, subject to the lock-up agreements described above, MegaChips will hold              shares of our common stock. We also intend to register shares of common stock that we may issue under our employee equity incentive plans. Once we register these shares, they will be able to be sold freely in the public market upon issuance, subject to existing market stand-off or lock-up agreements with the underwriters.

If securities analysts or industry analysts downgrade our common stock, publish negative research or reports, or fail to publish reports about our business, our stock price and trading volume could decline.

The market price and trading market for our common stock will be influenced by the research and reports that industry or securities analysts publish about us, our business and our market. If one or more analysts adversely change their recommendation regarding our stock or change their recommendation about our competitors’ stock, our stock price would likely decline. If one or more analysts cease coverage of us or fail to regularly publish reports on us, we could lose visibility in the financial markets which in turn could cause our stock price or trading volume to decline. In addition, if our operating results fail to meet the expectations created by securities analysts’ reports, our stock price could decline.

42

We may invest or spend the proceeds of this offering in ways with which you may not agree or in ways which may not yield a return.

Our management will have considerable discretion in the application of the net proceeds of this offering, and you will not have the opportunity, as part of your investment decision, to assess whether the proceeds are being used appropriately. The net proceeds may be used for corporate purposes that do not increase the value of our business, which could cause our stock price to decline.

We do not intend to pay dividends on our common stock so any returns will be limited to changes in the value of our common stock.

We have never declared or paid any cash dividends on our common stock. We currently anticipate that we will retain future earnings for the development, operation, and expansion of our business and do not anticipate declaring or paying any cash dividends for the foreseeable future. Although our existing loan agreements do not contain restrictions on our ability to pay dividends or make distributions, we may in the future amend our existing loan agreements or enter into agreements that contain such restrictions. Any return to stockholders will therefore be limited to the increase, if any, in our stock price, which may never occur.

We might not be able to utilize a significant portion of our net operating loss carryforwards and research and development tax credit carryforwards.

As of December 31, 2018, we had U.S. federal and state net operating loss, or NOL, carryforwards of approximately $160.7 million and $63.9 million, respectively, and U.S. federal and state research and development tax credit carryforwards of approximately $4.6 million and $5.2 million, respectively. The U.S. federal NOL carryforwards begin to expire in 2025 and the state NOL carryforwards begin to expire in 2028. The U.S. federal research and development tax credit carryforwards begin to expire in 2025 and the state research and development tax credit carryforwards carry forward indefinitely. These net operating loss and U.S. federal tax credit carryforwards could expire unused and be unavailable to offset future income tax liabilities. In addition, under Section 382 of the Internal Revenue Code of 1986, as amended, or the Code, and corresponding provisions of California state law, if a corporation undergoes an “ownership change,” which is generally defined as a greater than 50% change, by value, in its equity ownership over a three-year period, the corporation’s ability to use its pre-change net operating loss carryforwards and other pre-change tax attributes to offset its post-change income may be limited. We completed a Section 382 analysis and determined an ownership change occurred in 2014 and concluded that it had no impact on U.S. federal and California net operating losses or on U.S. federal research and development credits. In addition, we may experience ownership changes in the future as a result of subsequent shifts in our stock ownership, including this offering, some of which may be outside of our control. If we determine that an ownership change has occurred and our ability to use our historical net operating loss and tax credit carryforwards is materially limited, it would harm our future business, financial condition, and results of operations by effectively increasing our future tax obligations. In addition, under the Tax Act, federal NOLs incurred in 2018 and in future years may be carried forward indefinitely but generally may not be carried back and the deductibility of such NOLs is limited to 80% of taxable income.

As a new investor, you will experience immediate and substantial dilution in the book value of the shares that you purchase in this offering.

The initial public offering price is substantially higher than the pro forma net tangible book value per share of our common stock immediately following this offering based on the total value of our tangible assets less our total liabilities. Therefore, if you purchased our common stock in this offering, at the assumed initial public offering price of $         per share (the midpoint of the price range set forth on the cover page of this prospectus), you would experience an immediate dilution of $         per share, the difference between the price per share you pay for our common stock and our pro forma net tangible book value per share as of June 30, 2019, after giving effect to the issuance by us of              shares of our common stock in this offering. See “Dilution.”

43

Our actual operating results may not meet our guidance and investor expectations, which would likely cause our stock price to decline.

From time to time, we may release guidance in our earnings releases, earnings conference calls, or otherwise, regarding our future performance that represent our management’s estimates as of the date of release. If given, this guidance, which will include forward-looking statements, will be based on projections prepared by our management. Projections are based upon a number of assumptions and estimates that, while presented with numerical specificity, are inherently subject to significant business, economic, and competitive uncertainties and contingencies, many of which are beyond our control. The principal reason that we expect to release guidance is to provide a basis for our management to discuss our business outlook with analysts and investors. With or without our guidance, analysts, and other investors may publish expectations regarding our business, financial condition, and results of operations. We do not accept any responsibility for any projections or reports published by any such third parties. Guidance is necessarily speculative in nature, and it can be expected that some or all of the assumptions of the guidance furnished by us will not materialize or will vary significantly from actual results. If our actual performance does not meet or exceed our guidance or investor expectations, the trading price of our common stock is likely to decline.

We have not operated as a public company and may not be able to effectively or efficiently manage our transition to a public company.

We have never operated as a public company and will incur significant legal, accounting, and other expenses that we did not incur as a private company. Our management team and other personnel will need to devote a substantial amount of time to, and we may not effectively or efficiently manage, our transition into a public company.

We intend to hire additional accounting and finance personnel with system implementation experience and expertise regarding compliance with the Sarbanes-Oxley Act. We may be unable to locate and hire qualified professionals with requisite technical and public company experience when and as needed. In addition, new employees will require time and training to learn our business and operating processes and procedures. If we are unable to recruit and retain additional finance personnel or if our finance and accounting team is unable for any reason to respond adequately to the increased demands that will result from being a public company, the quality and timeliness of our financial reporting may suffer, which could result in the identification of material weaknesses in our internal controls. Any consequences resulting from inaccuracies or delays in our reported financial statements could cause our stock price to decline and could harm our business, financial condition, and results of operations.

If we fail to strengthen our financial reporting systems, infrastructure, and internal control over financial reporting to meet the demands that will be placed upon us as a public company, including the requirements of the Sarbanes-Oxley Act, we may be unable to report our financial results timely and accurately or prevent fraud. We expect to incur significant expense and devote substantial management effort toward ensuring compliance with Section 404 of the Sarbanes-Oxley Act, or Section 404.

As a result of becoming a public company, we will become subject to additional regulatory compliance requirements, including Section 404, and if we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud.

Rules and regulations such as the Sarbanes-Oxley Act have increased our legal and finance compliance costs and made some activities more time-consuming and costly. For example, Section 404 requires that our management report on, and our independent auditors attest to, the effectiveness of our internal control structure and procedures for financial reporting. However, our auditors will not be required to formally attest to the effectiveness of our internal control over financial reporting pursuant to Section 404 until we are no longer an “emerging growth company,” as defined in the JOBS Act. Effective internal controls are necessary for us to

44

provide reliable financial reports and effectively prevent fraud. Section 404 compliance may divert internal resources and will take a significant amount of time and effort to complete. We may not be able to successfully complete the procedures and certification and attestation requirements of Section 404 by the time we will be required to do so. Implementing these changes may take a significant amount of time and may require specific compliance training of our personnel. In the future, we may discover areas of our internal controls that need improvement. If our auditors or we discover a material weakness or significant deficiency, the disclosure of that fact, even if quickly remedied, could reduce the market’s confidence in our consolidated financial statements and harm our stock price. Any inability to provide reliable financial reports or prevent fraud would harm our business. We may not be able to effectively and timely implement necessary control changes and employee training to ensure continued compliance with the Sarbanes-Oxley Act and other regulatory and reporting requirements. If we fail to successfully complete the procedures and certification and attestation requirements of Section 404, or if in the future our Chief Executive Officer, Chief Financial Officer or independent registered public accounting firm determines that our internal controls over financial reporting are not effective as defined under Section 404, we could be subject to investigations or sanctions by Nasdaq, the SEC or other regulatory authorities. Furthermore, investor perceptions of the company may suffer, and this could cause a decline in the market price of our shares of common stock. We cannot assure you that we will be able to fully comply with the requirements of the Sarbanes-Oxley Act or that management or, when applicable, our auditors will conclude that our internal controls are effective in future periods. Irrespective of compliance with Section 404, any failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation.

We are an emerging growth company, and any decision on our part to comply only with certain reduced reporting and disclosure requirements applicable to emerging growth companies could make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act. We intend to take advantage of certain exemptions under the JOBS Act from various public company reporting requirements, including not being required to have our internal control over financial reporting audited by our independent registered public accounting firm pursuant to Section 404(b) of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and any golden parachute payments not previously approved. We may take advantage of these exemptions for up to five years or until we are no longer an “emerging growth company,” whichever is earlier.

In addition, Section 107 of the JOBS Act also provides that an emerging growth company can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act for complying with new or revised accounting standards. An emerging growth company can therefore delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. However, we are choosing to “opt out” of such extended transition period, and, as a result, we will comply with new or revised accounting standards on the relevant dates on which adoption of such standards is required for non-emerging growth companies. Section 107 of the JOBS Act provides that our decision to opt out of the extended transition period for complying with new or revised accounting standards is irrevocable.

We cannot predict if investors will find our common stock less attractive if we choose to rely on any of the exemptions afforded to emerging growth companies. If some investors find our common stock less attractive because we rely on any of these exemptions, there may be a less active trading market for our common stock and the market price of our common stock may be more volatile.

45

Anti-takeover provisions in our charter documents and under Delaware law could make an acquisition of us more difficult, limit attempts by our stockholders to replace or remove our current management, and limit the market price of our common stock.

Provisions in our certificate of incorporation and bylaws, as amended and restated in connection with this offering, may have the effect of delaying or preventing a change of control or changes in our management. Our amended and restated certificate of incorporation and bylaws include provisions that:

These provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors, which is responsible for appointing the members of our management. In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which generally prohibits a Delaware corporation from engaging in any of a broad range of business combinations with any interested stockholder for a period of three years following the date on which the stockholder became an interested stockholder. See “Description of Capital Stock—Anti-Takeover Effects of Provisions of Our Certificate of Incorporation, Our Bylaws and Delaware Law” for additional information. Any delay or prevention of a change of control transaction or changes in our management could cause our stock price to decline.

Our bylaws designate the Court of Chancery of the State of Delaware as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain what they believe to be a favorable judicial forum for disputes with us or our directors, officers, or other employees.

Our bylaws, as amended and restated in connection with this offering, provide that, unless we consent in writing to the selection of an alternative forum, to the fullest extent permitted by law, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for (a) any derivative action or proceeding brought on our behalf, (b) any action asserting a claim of breach of a fiduciary duty owed by any of our directors, officers, or other employees to us or our stockholders, (c) any action asserting a claim arising pursuant to any provision of the Delaware General Corporation Law, our certificate of incorporation or our bylaws, or (d) any action asserting a claim against us governed by the internal affairs doctrine. Nothing in our amended and restated bylaws

46

precludes stockholders that assert claims under the Securities Act or the Securities Exchange Act of 1934, as amended, or the Exchange Act, from bringing such claims in state or federal court, subject to applicable law.

Any person or entity purchasing or otherwise acquiring any interest in our capital stock shall be deemed to have notice of and consented to the provisions of our bylaws described above. This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers, or other employees, which may discourage such lawsuits against us and our directors, officers, or other employees. Alternatively, if a court were to find these provisions of our bylaws inapplicable to, or unenforceable in respect of, one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could adversely affect our business, financial condition, and results of operations and result in a diversion of the time and resources of our management and board of directors.

47

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This prospectus, including “Prospectus Summary,” “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and “Business,” contains forward-looking statements. We may, in some cases, use words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “should,” “will,” “would,” or the negative of those terms, and similar expressions that convey uncertainty of future events or outcomes to identify these forward-looking statements. Any statements contained herein that are not statements of historical facts may be deemed to be forward-looking statements. Forward-looking statements in this prospectus include, but are not limited to, statements about:

These forward-looking statements reflect our management’s beliefs and views with respect to future events and are based on estimates and assumptions as of the date of this prospectus and are subject to risks and uncertainties. We discuss many of these risks in greater detail under “Risk Factors.” Moreover, we operate in a very competitive and rapidly changing environment. New risks emerge from time to time. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. Given these uncertainties, you should not place undue reliance on these forward-looking statements.

You should read this prospectus and the documents that we reference in this prospectus and have filed as exhibits to the registration statement, of which this prospectus is a part, completely and with the understanding that our actual future results may be materially different from what we expect. We qualify all of the forward-looking statements in this prospectus by these cautionary statements.

48

You should not rely upon forward-looking statements as predictions of future events. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee that the future results, levels of activity, performance, or events and circumstances reflected in the forward-looking statements will be achieved or occur. Moreover, neither we nor any other person assumes responsibility for the accuracy and completeness of the forward-looking statements. We undertake no obligation to update publicly any forward-looking statements for any reason after the date of this prospectus to conform these statements to actual results or to changes in our expectations, except as required by law.

49

INDUSTRY AND MARKET DATA

This prospectus includes statistical and other industry and market data that we obtained from industry publications and research, surveys, and studies conducted by third parties, as well as estimates by our management based on such data. All of the market data and estimates used in this prospectus involve a number of assumptions and limitations, and you are cautioned not to give undue weight to such data and estimates. We believe that the information from these industry publications, surveys, and studies is reliable; however, our business is subject to a high degree of risk. See “Risk Factors” for additional information regarding risks that could cause results to differ materially from those expressed in the estimates made by the independent parties and by us.

Certain information in this prospectus is contained in independent industry publications. The source of these independent industry publications is provided below:

50

USE OF PROCEEDS

We estimate that we will receive net proceeds of approximately $         million (or approximately $         million if the underwriters’ over-allotment option is exercised in full) from the sale of the shares of common stock offered by us in this offering, based on an assumed initial public offering price of $         per share (the midpoint of the price range set forth on the cover page of this prospectus), and after deducting underwriting discounts and commissions and estimated offering expenses payable by us. We will not receive any of the proceeds from the sale of the shares of common stock offered by the Selling Stockholder.

A $1.00 increase (decrease) in the assumed initial public offering price of $         per share would increase (decrease) the net proceeds to us from this offering by approximately $         million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting underwriting discounts and commissions and estimated offering expenses payable by us.

Similarly, a 1.0 million share increase (decrease) in the number of shares offered by us, as set forth on the cover of this prospectus, would increase (decrease) the net proceeds to us by $         million, assuming no change in the assumed initial public offering price per share, and after deducting underwriting discounts and commissions and estimated offering expenses payable by us.

The principal purposes of this offering are to increase our capitalization and financial flexibility, establish a public market for our common stock, and facilitate future access to the public equity markets by us, our employees and our current sole stockholder, obtain additional capital to support our operations, and increase our visibility in the marketplace.

Our expected use of the net proceeds from this offering represents our current intentions based upon our present plans and business condition. As of the date of this prospectus, we cannot predict with certainty all of the particular uses for the net proceeds to be received upon completion of this offering, or the amounts that we will actually spend on the uses set forth above. However, we currently intend to use the net proceeds to us from this offering primarily for general corporate purposes, including working capital, sales and marketing activities, product development, general and administrative matters, and capital expenditures, although we do not currently have any specific or preliminary plans with respect to the use of proceeds for such purposes.

We also intend to use approximately $         of the net proceeds we receive from this offering to prepay in part outstanding indebtedness under (a) our revolving line of credit with MUFG for a principal amount of up to $50.0 million, or the MUFG Revolving Line of Credit, of which $41.0 million was outstanding as of June 30, 2019 and (b) our revolving line of credit with SMBC with an aggregate principal amount of up to $20.0 million, or the SMBC Revolving Credit Line, of which $2.0 million was outstanding as of June 30, 2019. Loans under the MUFG Revolving Line of Credit bear a variable rate of interest based upon the date and term of each loan, and for the outstanding loans currently ranges from 3.28% to 4.07% per annum. The loan under the SMBC Revolving Credit Line bears a variable rate of interest based upon the interest rate quoted by SMBC and agreed by us at the time the loan is made, and was 4.97% for the loan made on December 19, 2018. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources—Debt Obligations.” However, our intention to prepay a portion of our debt obligations may change due to market or other factors. We also may use a portion of the net proceeds to acquire complementary businesses, products, services, or technologies, however, we do not have agreements or commitments for any specific acquisitions at this time.

Pending the uses described above, we intend to invest the net proceeds from this offering in short term, interest-bearing securities such as money market accounts, certificates of deposit, commercial paper and guaranteed obligations of the U.S. government.

51

The amounts and timing of our actual use of the net proceeds will vary depending on numerous factors, including our ability to gain access to additional financing and the relative success and cost of our research and development programs. As a result, our management will have broad discretion in the application of the net proceeds, and investors will be relying on our judgment regarding the application of the net proceeds of this offering. In addition, we might decide to postpone or not pursue certain development activities if the net proceeds from this offering and any other sources of cash are less than expected.

52

DIVIDEND POLICY

We have never declared or paid cash dividends on our capital stock. We do not anticipate declaring or paying, in the foreseeable future, any cash dividends on our capital stock. We currently intend to retain all available funds and any future earnings to support our operations and finance the growth and development of our business. Any future determination related to our dividend policy will be made at the discretion of our board of directors and will depend upon, among other factors, our results of operations, financial condition, capital requirements, contractual restrictions, business prospects, and other factors our board of directors may deem relevant. Although our existing loan agreements do not contain restrictions on our ability to pay dividends or make distributions, we may in the future amend our existing loan agreements or enter into new credit facilities that contain such restrictions.

53

CAPITALIZATION

The following table sets forth our cash and cash equivalents, and our capitalization as of June 30, 2019:

The pro forma and pro forma adjusted information below is illustrative only, and our capitalization following the completion of this offering will be adjusted based on the actual initial public offering price and other terms of this offering determined at pricing. You should read this table together with “Selected Consolidated Financial Data” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and the related notes appearing elsewhere in this prospectus.

54

Unless otherwise indicated, the number of shares of our common stock to be outstanding after this offering is based on 500 shares of common stock outstanding as of June 30, 2019, and excludes:

The foregoing discussion and table assumes or gives effect to:

55

DILUTION

If you invest in our common stock in this offering, your ownership interest will be immediately diluted to the extent of the difference between the initial public offering price per share of our common stock and the pro forma as adjusted net tangible book value per share of our common stock after this offering.

Our historical net tangible book value (deficit) as of June 30, 2019, was approximately $(3.3) million, or $(6,689) per share of our common stock. Our historical net tangible book value (deficit) is the amount of our total tangible assets less our total liabilities. Historical net tangible book value (deficit) per share is our historical net tangible book value (deficit) divided by the number of shares of common stock outstanding as of June 30, 2019.

Our pro forma net tangible book value as of June 30, 2019, was $         million, or $         per share of common stock. Pro forma net tangible book value gives effect to a      - for -      stock split of our common stock to be effected prior to the completion of this offering.

Pro forma as adjusted net tangible book value is our pro forma net tangible book value (deficit), plus the effect of the sale of              shares of our common stock in this offering at an assumed initial public offering price of $         per share (the midpoint of the range set forth on the cover of this prospectus), after deducting underwriting discounts and commissions and estimated offering expenses payable by us. This amount represents an immediate increase in pro forma as adjusted net tangible book value of $         per share to our existing stockholder, and an immediate dilution of $        per share to new investors participating in this offering.

The following table illustrates this dilution on a per share basis:

A $1.00 increase (decrease) in the assumed initial public offering price of $         per share (the midpoint of the price range set forth on the cover page of this prospectus) would increase (decrease) the pro forma as adjusted net tangible book value per share after this offering by approximately $         per share and the dilution in pro forma per share to investors participating in this offering by approximately $         per share, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting underwriting discounts and commissions and estimated offering expenses payable by us.

Similarly, a 1.0 million share increase (decrease) in the number of shares offered by us, as set forth on the cover of this prospectus, would increase (decrease) the pro forma as adjusted net tangible book value per share after this offering by approximately $         and decrease (increase) the dilution in pro forma per share to investors participating in this offering by approximately $        , assuming the assumed initial public offering price of $         per share (the midpoint of the price range set forth on the cover of this prospectus) remains the same, and after deducting underwriting discounts and commissions and estimated offering expenses payable by us.

If the underwriters exercise their over-allotment option in full, the pro forma as adjusted net tangible book value will increase to $         per share, representing an immediate increase in pro forma as adjusted net tangible

56

book value to our existing stockholders of $         per share and an immediate decrease of dilution of $         per share to new investors participating in this offering.

The following table summarizes, on a pro forma as adjusted basis as of June 30, 2019, the number of shares purchased or to be purchased from us, the total consideration paid or to be paid to us, and the average price per share paid or to be paid to us by our existing stockholder, or the Selling Stockholder, and investors participating in this offering at an assumed initial public offering price of $         per share (the midpoint of the price range set forth on the cover of this prospectus), before deducting underwriting discounts and commissions and estimated offering expenses payable by us. As the table below shows, investors participating in this offering will pay an average price per share substantially higher than our existing stockholder paid.

Sales by the Selling Stockholder in this offering will reduce the number of shares of common stock held by the Selling Stockholder to         shares, or         % of the total number of shares of common stock to be outstanding after this offering and will increase the number of shares of common stock held by new investors to          shares, or         % of the total number of shares of common stock to be outstanding after this offering, assuming the number of shares offered by the Selling Stockholder, as set forth on the cover of this prospectus, remains the same. In addition, if the underwriters exercise their over-allotment option in full, the number of shares of common stock held by the Selling Stockholder will be reduced to          shares, or     % of the total number of shares of common stock to be outstanding after this offering, and the number of shares of common stock held by investors participating in this offering will be further increased to          shares, or     % of the total number of shares of common stock to be outstanding after this offering. The sales by the Selling Stockholder will have no effect on the pro forma as adjusted net tangible book value per share after giving effect to this offering or the dilution in pro forma net tangible book value per share to investors participating in this offering.

A $1.00 increase (decrease) in the assumed initial public offering price of $         per share (the midpoint of the price range set forth on the cover page of this prospectus) would increase (decrease) the total consideration paid by investors participating in this offering, total consideration paid by all stockholders and the average price per share paid by all stockholders by approximately $         million, $         million and $        , respectively, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and before deducting underwriting discounts and commissions and estimated offering expenses payable by us.

Similarly, a 1.0 million share increase (decrease) in the number of shares offered by us, as set forth on the cover of this prospectus, would increase (decrease) the total consideration paid by investors participating in this offering, total consideration paid by all stockholders and the average price per share paid by all stockholders by approximately $        million, $        million and $        , respectively, assuming the assumed initial public offering price of $        per share (the midpoint of the price range set forth on the cover of this prospectus) remains the same, and after deducting underwriting discounts and commissions and estimated offering expenses payable by us.

The foregoing discussion and table are based on          shares of common stock outstanding as of June 30, 2019, and excludes:

57

The foregoing discussion and table assumes or gives effect to:

We may choose to raise additional capital through the sale of equity or convertible debt securities due to market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans. To the extent we issue additional shares of common stock or other equity or convertible debt securities in the future, there will be further dilution to investors participating in this offering.

58

SELECTED CONSOLIDATED FINANCIAL DATA

The selected consolidated statements of operations data for the years ended December 31, 2017 and 2018, and the consolidated balance sheet data as of December 31, 2017 and 2018 are derived from our audited consolidated financial statements included elsewhere in this prospectus. The selected statement of operations data for the six months ended June 30, 2018 and 2019 and the balance sheet data as of June 30, 2019 have been derived from our unaudited interim consolidated financial statements included elsewhere in this prospectus. The unaudited interim consolidated financial statements have been prepared on the same basis as our audited consolidated financial statements and reflect, in the opinion of management, all adjustments, consisting only of normal, recurring adjustments, that are necessary for the fair presentation of the unaudited interim consolidated financial information. Our historical results are not necessarily indicative of the results that may be expected in the future and the results for the six months ended June 30, 2019 are not necessarily indicative of results to be expected for the full year ending December 31, 2019 or any other period. The selected consolidated financial data below should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes included elsewhere in this prospectus. The selected consolidated financial data in this section are not intended to replace our consolidated financial statements and the related notes, and are qualified in their entirety by the consolidated financial statements and related notes included elsewhere in this prospectus.

59

60

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations together with the consolidated financial statements and related notes that are included elsewhere in this prospectus. This discussion contains forward-looking statements based upon current plans, expectations and beliefs that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth under “Risk Factors” and in other parts of this prospectus.

Overview

We are a leading provider of silicon timing systems solutions. Our timing solutions are the heartbeat of our customers’ electronic systems, solving complex timing problems and enabling industry-leading products. We provide solutions that are differentiated by high performance and reliability, programmability, small size, and low power consumption. Our products have been designed into over 200 applications across our target markets, including enterprise and telecommunications infrastructure, automotive, industrial, IoT and mobile, and aerospace and defense. As of June 30, 2019, we have shipped over 1.4 billion units to over 10,000 end customers. Our top end customers by revenue for the six months ended June 30, 2019 include Apple, Fitbit, GARMIN, HiKVision, Samsung, Google, Microsoft, Dell, and Huami.

We commenced commercial shipments of our first oscillator products in 2006. Substantially all of our revenue for the years ended December 31, 2017 and 2018 and for the six months ended June 30, 2018 and 2019 was derived from sales in the IoT and mobile, industrial, and consumer markets. In 2017, we began introducing products for the automotive market.

Substantially all of our revenue to date has been derived from sales of oscillator systems across our target end markets. We intend to introduce products into the clock IC market, which we began sampling in the second quarter of 2019, and to focus on clock IC and timing sync solutions in the future. We generated modest revenue from sales of our resonators in 2018 and began sampling our first clock IC to customers in 2019. We seek to aggressively expand our presence in these two markets.

We sell our products primarily through distributors and resellers, who in turn sell to our end customers. For the years ended December 31, 2017 and 2018 and the six months ended June 30, 2018 and 2019, our top three distributors by revenue together accounted for approximately 79%, 65%, 62%, and 61% of our revenue, respectively. Sales through our distributors and resellers accounted for approximately 99%, 98%, 99%, and 98% and sales through our direct sales force accounted for approximately 1%, 2%, 1%, and 2% of our revenue for the years ended December 31, 2017 and 2018 and the six months ended June 30, 2018 and 2019, respectively. Based on sell-through information available through our distributors, we believe that revenue attributable to our top ten end customers accounted for 74%, 60%, 60%, and 53% of our revenue for the years ended December 31, 2017 and 2018 and the six months ended June 30, 2018 and 2019, respectively. Sales attributable to our largest end customer accounted for approximately 61%, 40%, 34%, and 37% of our revenue for the years ended December 31, 2017 and 2018 and the six months ended June 30, 2018 and 2019, respectively. In addition, approximately 96%, 93%, 94%, and 92% of our revenue for the years ended December 31, 2017 and 2018 and the six months ended June 30, 2018 and 2019, respectively, was from distributors with ship-to locations outside the United States. Based on sell-through information provided by these distributors, we believe the majority of our end customers are based in the U.S.

We operate a fabless business model, allowing us to focus on the design, sales, and marketing of our products, quickly scale production, and significantly reduce our capital expenditures. We leverage our global network of distributors and resellers to address the broad set of end markets we serve. For our largest accounts, dedicated sales personnel work with the end customer to ensure that our solutions fully address the end

61

customer’s timing needs. Our smaller customers work directly with our distributors to select the optimum timing solution for their needs.

We were acquired by MegaChips in 2014 and are currently a wholly owned subsidiary of MegaChips, a fabless semiconductor company based in Japan and traded on the Tokyo Stock Exchange. Upon completion of this offering, MegaChips will continue to hold a majority controlling interest in our common stock. We currently anticipate that MegaChips will remain a long-term strategic stakeholder in us.

Key Factors Affecting Our Performance

Customer Orders and Forecasts

Because our sales are made pursuant to standard purchase orders, orders may be cancelled, reduced, or rescheduled with little or no notice and without penalty. Cancellations of orders could result in the loss of anticipated sales without allowing us sufficient time to reduce our inventory and operating expenses. In addition, changes in forecasts or the timing of orders from customers exposes us to the risks of inventory shortages or excess inventory. We may not be able to fulfill increased demand, at least in the short term, as we do not intend to acquire excess inventory to pre-build custom products.

Design Wins with New and Existing Customers

Our solutions enable our customers to differentiate their product offerings and position themselves to gain market share. We work closely with our customers to understand their product roadmaps and strategies. Our end customers continuously develop new products in existing and new application areas. We also consider design wins critical to our future success and anticipate being increasingly dependent on revenue from new design wins for our new higher-end products with higher average selling prices, or ASPs. The selection process is typically lengthy and may require us to incur significant design and development expenditures in pursuit of a design win with no assurance that our solutions will be selected. As a result, the loss of any key design win or any significant delay in the ramp of volume production of the customer’s products into which our product is designed could adversely affect our business.

Customer Demand and Product Life Cycles

Once customers design our silicon timing systems solutions into their products, we closely monitor all aspects of their demand cycle, including the initial design phase, prototype production, volume production, and inventories, as well as end-market demand, including seasonality, cyclicality, and the competitive landscape. Given our customer relationships and the long-term aspects of our solutions, we benefit from visibility into customer demand. This in turn provides an opportunity for us to monitor and refine our business fundamentals.

Product Adoption within New Markets and Applications

As we evaluate new market opportunities and bring new products to market, we pay particular attention to forecasts by industry analysts and the adoption curve of technology. We also analyze in detail potential competing forces that could hinder such adoption. If we fail to anticipate or respond to technological shifts or market demands, or to timely develop new or enhanced products or technologies in response to the same, it could result in decreased revenue and the loss of our design wins to our competitors.

Pricing, Product Cost, and Product Mix

The ASPs of our products vary significantly. While the ASP of any individual product generally decreases over time, our average ASPs have generally increased as we continue to introduce new higher-end products with higher ASPs. Our pricing and margins depend on the volumes and the features of the timing devices we provide

62

to our customers. We continually monitor and work to reduce the cost of our products and improve the potential value our solutions provide to our customers as we target new design win opportunities and manage the product life cycles of our existing customer designs. Since we rely on third-party wafer foundries and assembly and test contractors to manufacture, assemble, and test our products, we maintain a close relationship with our suppliers to improve quality, increase yields, and lower manufacturing costs.

Gross margin, or gross profit as a percentage of revenue, has been, and will continue to be, affected by a variety of factors, including ASPs, and product mix in a given period, material costs, yields, and manufacturing operations costs. We believe the primary driver of gross margin is the ASPs negotiated between us and our customers relative to material costs and yield improvement. As our products mature and unit volumes increase, we expect their ASPs to decline. These declines often coincide with improvements in manufacturing yields and lower wafer, assembly, and testing costs, which offset some or all of the margin reduction that results from lower ASPs. However, we expect our gross margin to fluctuate on a quarterly basis as a result of changes in ASPs due to new product introductions, existing product transitions into high-volume manufacturing, manufacturing costs, and our product mix.

Cyclical Nature of the Semiconductor Industry

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles, and wide fluctuations in product supply and demand. Downturns in the semiconductor industry, including the current downturn, have been characterized by diminished product demand, production overcapacity, high inventory levels, and accelerated erosion of average selling prices. The current downturn in the semiconductor industry has been attributed to a variety of factors, including the ongoing U.S.-China trade dispute, weakness in demand and pricing for semiconductors across applications, and excess inventory. While this downturn has not directly impacted our business to date, any prolonged or significant downturn in the semiconductor industry generally could adversely affect our business and reduce demand for our products and otherwise harm our financial condition and results of operations.

Components of Results of Operations

Revenue

We derive revenue primarily from sales of silicon timing systems products to distributors and resellers who in turn sell to our end customers. We also sell products directly to end customers who integrate our products into their applications. Our sales are made pursuant to standard purchase orders which may be cancelled, reduced or rescheduled, with little or no notice. We recognize product revenue upon shipment when we satisfy our performance obligations as evidenced by the transfer of control of our products to customers. We measure revenue based on the amount of consideration we expect to be entitled to in exchange for products.

Cost of Revenue

Cost of revenue consists of wafers acquired from third-party foundries, assembly, packaging, and test cost of our products paid to third-party contract manufacturers, and personnel and other costs associated with our manufacturing operations. Cost of revenue also includes depreciation of production equipment, inventory write-downs, amortization of internally developed software, shipping and handling costs, and allocation of overhead and facility costs. We also include credits for rebates received from foundries to cost of revenue.

Operating Expenses

Our operating expenses consist of research and development, sales and marketing, and general and administrative expenses. Personnel costs are the most significant component of our operating expenses and consist of salaries, benefits, bonuses, stock-based compensation, and commissions. Our operating expenses also include consulting costs, allocated costs of facilities, information technology, and depreciation. We expect our operating expenses to fluctuate in absolute dollars and as a percentage of revenue over time.

63

Research and Development

Our research and development efforts are focused on the design and development of next-generation silicon timing systems solutions. Our research and development expense consists primarily of personnel costs, which include stock-based compensation, pre-production engineering mask costs, software license and intellectual property expenses, design tools and prototype-related expenses, facility costs, supplies, professional and consulting fees, and allocated overhead costs. We expense research and development costs as incurred. We believe that continued investment in our products and services is important for our future growth and acquisition of new customers and, as a result, we expect our research and development expenses to continue to increase in absolute dollars. However, we expect our research and development expense to fluctuate as a percentage of revenue from period to period depending on the timing of these expenses.

Sales and Marketing

Sales and marketing expense consists of personnel costs, including stock-based compensation, field application engineering support, travel costs, professional and consulting fees, advertising expenses, and allocated overhead costs. We expect sales and marketing expense to continue to increase in absolute dollars as we increase our sales and marketing personnel and grow our international operations, although it may fluctuate as a percentage of revenue from period to period depending on the timing of these expenses.

General and Administrative

General and administrative expense consists of personnel costs, including stock-based compensation, professional and consulting fees, accounting audit fees, legal costs, and allocated overhead costs. We expect general and administrative expense to increase in absolute dollars as we expand our finance and administrative personnel, grow our operations, and incur additional expense associated with operating as a public company, including director and officer liability insurance and legal and compliance costs, although it may fluctuate as a percentage of revenue from period to period depending on the timing of these expenses.

Other Income (Expense)

Other income (expense) consists primarily of interest expense on our outstanding debt, foreign exchange gains and losses, and asset dispositions. See Note 7 to our consolidated financial statements for more information about our debt.

Income Tax Expense

Income tax expense consists primarily of state income taxes and income taxes in certain foreign jurisdictions in which we conduct business. We have a full valuation allowance for deferred tax assets as the realization of the full amount of our deferred tax asset is uncertain, including net operating loss, or NOL, carryforwards, and tax credits related primarily to research and development. We expect to maintain this full valuation allowance until realization of the deferred tax assets becomes more likely than not. At December 31, 2018, we had NOL carryforwards of approximately $160.7 million and $63.9 million for U.S. federal and state income tax purposes, respectively, and had research and development tax credit carryforwards of approximately $4.6 million and $5.2 million for U.S. federal and state income tax purposes, respectively. Of the federal NOL carryforwards, approximately $148.3 million will expire in various years through 2036, if not utilized, and approximately $12.4 million will carry forward indefinitely. NOL carryforwards for state income tax purposes, if not utilized, will expire in various years through 2038. The research and development credit carryforwards for federal tax purposes will expire in various years through 2038, and state tax credits carry forward indefinitely.

64

Results of Operations

The following table summarizes our results of operations for the periods presented. The period-to-period comparison of results is not necessarily indicative of results to be expected for future periods.

The following table summarizes our results of operations as a percentage of revenue for each of the periods indicated: